[PATCH v2 6/7] dt-bindings: Add ANX6345 DP/eDP transmitter binding

From: Torsten Duwe
Date: Tue Jun 04 2019 - 08:27:27 EST


The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed
for portable devices.

Add a binding document for it.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Torsten Duwe <duwe@xxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/bridge/anx6345.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
new file mode 100644
index 000000000000..bd63f6ac107e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
@@ -0,0 +1,57 @@
+Analogix ANX6345 eDP Transmitter
+--------------------------------
+
+The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
+portable devices.
+
+Required properties:
+
+ - compatible : "analogix,anx6345"
+ - reg : I2C address of the device
+ - reset-gpios : Which GPIO to use for reset
+ - dvdd12-supply : Regulator for 1.2V digital core power.
+ - dvdd25-supply : Regulator for 2.5V digital core power.
+ - Video port for LVTTL input, using the DT bindings defined in [1].
+
+Optional properties:
+
+ - Video port for eDP output (panel or connector) using the DT bindings
+ defined in [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_fldo1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ anx6345_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+
+ anx6345_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ anx6345_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
--
2.16.4