[PATCH v5 1/6] regulator: lm363x: Make the gpio register enable flexible

[Dan Murphy]

The use of and enablement of the GPIO can be used across devices.
Use the enable_reg in the regulator descriptor for the register to
write.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
---

v5 - No changes to the patch changes requested in this patch were done in
patch 4 of this series - https://lore.kernel.org/patchwork/patch/1077408/

 drivers/regulator/lm363x-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index e02fdd1dd092..1b5d7d2f26b8 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
 
 	if (gpiod) {
 		cfg.ena_gpiod = gpiod;
-
-		ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
+		ret = regmap_update_bits(regmap,
+					 lm363x_regulator_desc[id].enable_reg,
 					 LM3632_EXT_EN_MASK,
 					 LM3632_EXT_EN_MASK);
 		if (ret) {
-- 
2.21.0.5.gaeb582a983