Re: [PATCH 1/4] arm64: dts: meson-g12a-sei510: add 32k clock to bluetooth node

[Neil Armstrong]

On 03/06/2019 11:47, Neil Armstrong wrote:
> The 32k low power clock is necessary for the bluetooth part of the
> combo module to initialize correctly, simply add the same clock we
> use for the sdio pwrseq.
> 
> Fixes: d1c023af1988 ("arm64: dts: meson-g12a-sei510: Add ADC Key and BT support")
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> index eac57d997e0b..3e0e119c13ce 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> @@ -530,6 +530,8 @@
>  	bluetooth {
>  		compatible = "brcm,bcm43438-bt";
>  		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> +		clocks = <&wifi32k>;
> +		clock-names = "lpo";
>  		vbat-supply = <&vddao_3v3>;
>  		vddio-supply = <&vddio_ao1v8>;
>  	};
> 

The Fixes is wrong... wifi32k was not present at this time.

Neil