[PATCH v2 2/7] scsi: NCR5380: Always re-enable reselection interrupt

From: Finn Thain
Date: Sat Jun 08 2019 - 21:31:36 EST


The reselection interrupt gets disabled during selection and must be
re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled
a disconnected command may time-out or the target may wedge the bus while
trying to reselect the host. This can happen after a command is aborted.

Fix this by enabling the reselection interrupt in NCR5380_main() after
calls to NCR5380_select() and NCR5380_information_transfer() return.

Cc: Michael Schmitz <schmitzmic@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v4.9+
Fixes: 8b00c3d5d40d ("ncr5380: Implement new eh_abort_handler")
Tested-by: Stan Johnson <userm57@xxxxxxxxx>
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/NCR5380.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index fe0535affc14..08e3ea8159b3 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -709,6 +709,8 @@ static void NCR5380_main(struct work_struct *work)
NCR5380_information_transfer(instance);
done = 0;
}
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
spin_unlock_irq(&hostdata->lock);
if (!done)
cond_resched();
@@ -1110,8 +1112,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
- if (!hostdata->connected)
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n");
goto out;
}
@@ -1119,7 +1119,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
if (err < 0) {
spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);

/* Can't touch cmd if it has been reclaimed by the scsi ML */
if (!hostdata->selecting)
@@ -1157,7 +1156,6 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
if (err < 0) {
shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
goto out;
}
if (!hostdata->selecting) {
@@ -1826,9 +1824,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
NCR5380_write(TARGET_COMMAND_REG, 0);

- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-
maybe_release_dma_irq(instance);
return;
case MESSAGE_REJECT:
@@ -1860,8 +1855,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
NCR5380_write(TARGET_COMMAND_REG, 0);

- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
@@ -1964,7 +1957,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd->result = DID_ERROR << 16;
complete_cmd(instance, cmd);
maybe_release_dma_irq(instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
msgout = NOP;
--
2.21.0