[PATCH 5.1 86/98] net: phy: dp83867: increase SGMII autoneg timer duration

From: Greg Kroah-Hartman
Date: Thu Jun 20 2019 - 14:16:47 EST


[ Upstream commit 1a97a477e666cbdededab93bd3754e508f0c09d7 ]

After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01).
That is not enough to finalize autonegatiation on some devices.
Increase this timer duration to maximum supported 16ms.

Signed-off-by: Max Uvarov <muvarov@xxxxxxxxx>
Cc: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/phy/dp83867.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 29cae4de9a4f..ffaf67bdb140 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -26,6 +26,12 @@

/* Extended Registers */
#define DP83867_CFG4 0x0031
+#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6))
+#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5)
+#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5)
+
#define DP83867_RGMIICTL 0x0032
#define DP83867_STRAP_STS1 0x006E
#define DP83867_RGMIIDCTL 0x0086
@@ -292,6 +298,18 @@ static int dp83867_config_init(struct phy_device *phydev)
0);
if (ret)
return ret;
+
+ /* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5
+ * are 01). That is not enough to finalize autoneg on some
+ * devices. Increase this timer duration to maximum 16ms.
+ */
+ ret = phy_modify_mmd(phydev, DP83867_DEVADDR,
+ DP83867_CFG4,
+ DP83867_CFG4_SGMII_ANEG_MASK,
+ DP83867_CFG4_SGMII_ANEG_TIMER_16MS);
+
+ if (ret)
+ return ret;
}

/* Enable Interrupt output INT_OE in CFG3 register */
--
2.20.1