Re: [PATCH v3 8/9] dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board

From: Maxime Ripard
Date: Mon Jun 24 2019 - 08:42:16 EST


Hi,

On Sun, Jun 23, 2019 at 12:38:00PM +0800, Icenowy Zheng wrote:
> The Lichee Zero Plus is a core board made by Sipeed, with a microUSB
> connector on it, TF slot or WSON8 SD chip, optional eMMC or SPI Flash.
> It has a gold finger connector for expansion, and UART is available from
> reserved pins w/ 2.54mm pitch. The board can use either SoChip S3 or
> Allwinner V3L SoCs.
>
> Add the device tree binding of the basic version of the core board --
> w/o eMMC or SPI Flash, w/ TF slot or WSON8 SD, and use S3 SoC.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> No changes in v3.
>
> Patch introduced in v2.
>
> Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
> index 000a00d12d6a..48c126a7a848 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
> @@ -353,6 +353,11 @@ properties:
> - const: licheepi,licheepi-zero
> - const: allwinner,sun8i-v3s
>
> + - description: Lichee Zero Plus (with S3, without eMMC/SPI Flash)
> + items:
> + - const: sipeed,lichee-zero-plus
> + - const: allwinner,sun8i-s3
> +

I didn't notice this before, but since this is not a LicheePi, it
should be before it, not after.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature