Re: [PATCH 2/2] arm64: dts: imx8mm: Correct OPP table according to latest datasheet
From: Leonard Crestez
Date: Fri Jun 28 2019 - 02:01:11 EST
On 28.06.2019 06:37, Anson.Huang@xxxxxxx wrote:
> According to latest datasheet (Rev.0.2, 04/2019) from below links,
> 1.8GHz is ONLY available for consumer part, so the market segment
> bits for 1.8GHz opp should ONLY available for consumer part accordingly.
> opp-hz = /bits/ 64 <1800000000>;
> opp-microvolt = <1000000>;
> /* Consumer only but rely on speed grading */
> - opp-supported-hw = <0x8>, <0x7>;
> + opp-supported-hw = <0x8>, <0x3>;
Only consumer parts should be fused for this highest OPP. If you don't
want to rely on this then maybe also delete the comment above?