Re: [PATCH 2/3] drm/bridge: ti-sn65dsi86: add debugfs

From: Laurent Pinchart
Date: Thu Jul 04 2019 - 08:35:35 EST


Hello,

On Thu, Jul 04, 2019 at 02:31:20PM +0200, Andrzej Hajda wrote:
> On 02.07.2019 17:44, Rob Clark wrote:
> > From: Rob Clark <robdclark@xxxxxxxxxxxx>
> >
> > Add a debugfs file to show status registers.
> >
> > Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 42 +++++++++++++++++++++++++++
> > 1 file changed, 42 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > index f1a2493b86d9..a6f27648c015 100644
> > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > @@ -5,6 +5,7 @@
> > */
> >
> > #include <linux/clk.h>
> > +#include <linux/debugfs.h>
> > #include <linux/gpio/consumer.h>
> > #include <linux/i2c.h>
> > #include <linux/iopoll.h>
> > @@ -109,6 +110,7 @@ struct ti_sn_bridge {
> > struct drm_dp_aux aux;
> > struct drm_bridge bridge;
> > struct drm_connector connector;
> > + struct dentry *debugfs;
> > struct device_node *host_node;
> > struct mipi_dsi_device *dsi;
> > struct clk *refclk;
> > @@ -178,6 +180,42 @@ static const struct dev_pm_ops ti_sn_bridge_pm_ops = {
> > SET_RUNTIME_PM_OPS(ti_sn_bridge_suspend, ti_sn_bridge_resume, NULL)
> > };
> >
> > +static int status_show(struct seq_file *s, void *data)
> > +{
> > + struct ti_sn_bridge *pdata = s->private;
> > + unsigned int reg, val;
> > +
> > + seq_puts(s, "STATUS REGISTERS:\n");

NO NEED TO SHOUT :-)

> > +
> > + pm_runtime_get_sync(pdata->dev);
> > +
> > + /* IRQ Status Registers, see Table 31 in datasheet */
> > + for (reg = 0xf0; reg <= 0xf8; reg++) {
> > + regmap_read(pdata->regmap, reg, &val);
> > + seq_printf(s, "[0x%02x] = 0x%08x\n", reg, val);
> > + }
> > +
> > + pm_runtime_put(pdata->dev);
> > +
> > + return 0;
> > +}
> > +
> > +DEFINE_SHOW_ATTRIBUTE(status);
> > +
> > +static void ti_sn_debugfs_init(struct ti_sn_bridge *pdata)
> > +{
> > + pdata->debugfs = debugfs_create_dir("ti_sn65dsi86", NULL);
>
> If some day we will have board with two such bridges there will be a
> problem.

Could we use the platform device name for this ?

> Anyway:
>
> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>
> > +
> > + debugfs_create_file("status", 0600, pdata->debugfs, pdata,
> > + &status_fops);
> > +}
> > +
> > +static void ti_sn_debugfs_remove(struct ti_sn_bridge *pdata)
> > +{
> > + debugfs_remove_recursive(pdata->debugfs);
> > + pdata->debugfs = NULL;
> > +}
> > +

You need to conditionally-compile this based on CONFIG_DEBUG_FS.

> > /* Connector funcs */
> > static struct ti_sn_bridge *
> > connector_to_ti_sn_bridge(struct drm_connector *connector)
> > @@ -869,6 +907,8 @@ static int ti_sn_bridge_probe(struct i2c_client *client,
> >
> > drm_bridge_add(&pdata->bridge);
> >
> > + ti_sn_debugfs_init(pdata);
> > +
> > return 0;
> > }
> >
> > @@ -879,6 +919,8 @@ static int ti_sn_bridge_remove(struct i2c_client *client)
> > if (!pdata)
> > return -EINVAL;
> >
> > + ti_sn_debugfs_remove(pdata);
> > +
> > of_node_put(pdata->host_node);
> >
> > pm_runtime_disable(pdata->dev);

--
Regards,

Laurent Pinchart