[Linux-kernel-mentees] [PATCH] Documentation: filesystems: Convert jfs.txt to reStructedText format.

[Shobhit Kukreti]

This converts the plain text documentation of jfs.txt to reStructuredText format.
Added to documentation build process and verified with make htmldocs

Signed-off-by: Shobhit Kukreti <shobhitkukreti@xxxxxxxxx>
---
 Documentation/filesystems/index.rst |  1 +
 Documentation/filesystems/jfs.rst   | 74 +++++++++++++++++++++++++++++++++++++
 Documentation/filesystems/jfs.txt   | 52 --------------------------
 3 files changed, 75 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/filesystems/jfs.rst
 delete mode 100644 Documentation/filesystems/jfs.txt

diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index 1131c34..d700330 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -41,3 +41,4 @@ Documentation for individual filesystem types can be found here.
    :maxdepth: 2
 
    binderfs.rst
+   jfs
diff --git a/Documentation/filesystems/jfs.rst b/Documentation/filesystems/jfs.rst
new file mode 100644
index 0000000..bfb6110
--- /dev/null
+++ b/Documentation/filesystems/jfs.rst
@@ -0,0 +1,74 @@
+===========================================
+IBM's Journaled File System (JFS) for Linux
+===========================================
+
+JFS Homepage:  http://jfs.sourceforge.net/
+
+Following Mount Options are Supported
+
+(*) == default
+ .. tabularcolumns:: |p{1.3cm}|p{1.3cm}|p{8.0cm}|
+
+.. cssclass:: longtable
+
+.. flat-table::   
+  :header-rows:  0
+  :stub-columns: 0
+  
+  * - iocharset
+    - =name
+    - Character set to use for converting from Unicode to ASCII. The default is to do no conversion. Use iocharset=utf8 for UTF-8 translations. 
+      This requires CONFIG_NLS_UTF8 to be set in the kernel .config file. iocharset=none specifies the default behavior explicitly.
+
+  * - resize
+    - =value
+    - Resize the volume to <value> blocks. JFS only supports growing a volume, not shrinking it. This option is only valid during a remount, 
+      when the volume is mounted read-write. The resize keyword with no value will grow the volume to the full size of the partition.
+	
+  * - nointegrity
+    -            
+    - Do not write to the journal. The primary use of this option is to allow for higher performance when restoring a volume from backup media. 
+      The integrity of the volume is not guaranteed if the system abnormally abends.
+
+  * - integrity
+    - (*)  
+    - Commit metadata changes to the journal. Use this option to remount a volume where the nointegrity option was previously specified in order 
+      to restore normal behavior.
+
+  * - errors
+    - =continue		
+    - Keep going on a filesystem error.
+
+  * - errors
+    - =remount-ro(*)
+    - Remount the filesystem read-only on an error.
+	
+  * - errors
+    - =panic
+    - Panic and halt the machine if an error occurs.
+
+  * - uid 
+    - =value
+    - Override on-disk uid with specified value
+
+  * - gid 
+    - =value
+    - Override on-disk gid with specified value
+
+  * - umask
+    - =value
+    - Override on-disk umask with specified octal value. For directories, the execute bit will be set if the corresponding read bit is set.
+
+  * - discard 
+    - =minlen
+    - :rspan:`1` :cspan:`1` This enables/disables the use of discard/TRIM commands.The discard/TRIM commands are sent to the underlying block device when blocks 
+      are freed. This is useful for SSD devices and sparse/thinly-provisioned LUNs. The FITRIM ioctl command is also available together with the nodiscard option.
+      The value of minlen specifies the minimum blockcount, when a TRIM command to the block device is considered useful. When no value is given to the 
+      discard option, it defaults to 64 blocks, which means 256KiB in JFS. The minlen value of discard overrides the minlen value given on an FITRIM ioctl()
+   
+  * - nodiscard(*)
+    -
+      
+
+The JFS mailing list can be subscribed to by using the link labeled
+"Mail list Subscribe" at our web page http://jfs.sourceforge.net/
diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt
deleted file mode 100644
index 41fd757..0000000
--- a/Documentation/filesystems/jfs.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-IBM's Journaled File System (JFS) for Linux
-
-JFS Homepage:  http://jfs.sourceforge.net/
-
-The following mount options are supported:
-(*) == default
-
-iocharset=name	Character set to use for converting from Unicode to
-		ASCII.  The default is to do no conversion.  Use
-		iocharset=utf8 for UTF-8 translations.  This requires
-		CONFIG_NLS_UTF8 to be set in the kernel .config file.
-		iocharset=none specifies the default behavior explicitly.
-
-resize=value	Resize the volume to <value> blocks.  JFS only supports
-		growing a volume, not shrinking it.  This option is only
-		valid during a remount, when the volume is mounted
-		read-write.  The resize keyword with no value will grow
-		the volume to the full size of the partition.
-
-nointegrity	Do not write to the journal.  The primary use of this option
-		is to allow for higher performance when restoring a volume
-		from backup media.  The integrity of the volume is not
-		guaranteed if the system abnormally abends.
-
-integrity(*)	Commit metadata changes to the journal.  Use this option to
-		remount a volume where the nointegrity option was
-		previously specified in order to restore normal behavior.
-
-errors=continue		Keep going on a filesystem error.
-errors=remount-ro(*)	Remount the filesystem read-only on an error.
-errors=panic		Panic and halt the machine if an error occurs.
-
-uid=value	Override on-disk uid with specified value
-gid=value	Override on-disk gid with specified value
-umask=value	Override on-disk umask with specified octal value.  For
-		directories, the execute bit will be set if the corresponding
-		read bit is set.
-
-discard=minlen	This enables/disables the use of discard/TRIM commands.
-discard		The discard/TRIM commands are sent to the underlying
-nodiscard(*)	block device when blocks are freed. This is useful for SSD
-		devices and sparse/thinly-provisioned LUNs.  The FITRIM ioctl
-		command is also available together with the nodiscard option.
-		The value of minlen specifies the minimum blockcount, when
-		a TRIM command to the block device is considered useful.
-		When no value is given to the discard option, it defaults to
-		64 blocks, which means 256KiB in JFS.
-		The minlen value of discard overrides the minlen value given
-		on an FITRIM ioctl().
-
-The JFS mailing list can be subscribed to by using the link labeled
-"Mail list Subscribe" at our web page http://jfs.sourceforge.net/
-- 
2.7.4