Re: [PATCH v3 1/6] dt-bindings: opp: Introduce opp-peak-KBps and opp-avg-KBps bindings

[Viresh Kumar]

On 17-07-19, 13:29, Saravana Kannan wrote:
> On Wed, Jul 17, 2019 at 12:54 AM Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
> >
> > On 02-07-19, 18:10, Saravana Kannan wrote:
> > > Interconnects often quantify their performance points in terms of
> > > bandwidth. So, add opp-peak-KBps (required) and opp-avg-KBps (optional) to
> > > allow specifying Bandwidth OPP tables in DT.
> > >
> > > opp-peak-KBps is a required property that replace opp-hz for Bandwidth OPP
> > > tables.
> > >
> > > opp-avg-KBps is an optional property that can be used in Bandwidth OPP
> > > tables.
> > >
> > > Signed-off-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> > > ---
> > >  Documentation/devicetree/bindings/opp/opp.txt | 15 ++++++++++++---
> > >  1 file changed, 12 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
> > > index 76b6c79604a5..c869e87caa2a 100644
> > > --- a/Documentation/devicetree/bindings/opp/opp.txt
> > > +++ b/Documentation/devicetree/bindings/opp/opp.txt
> > > @@ -83,9 +83,14 @@ properties.
> > >
> > >  Required properties:
> > >  - opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
> > > -  required property for all device nodes but devices like power domains. The
> > > -  power domain nodes must have another (implementation dependent) property which
> > > -  uniquely identifies the OPP nodes.
> > > +  required property for all device nodes but for devices like power domains or
> > > +  bandwidth opp tables. The power domain nodes must have another (implementation
> > > +  dependent) property which uniquely identifies the OPP nodes. The interconnect
> > > +  opps are required to have the opp-peak-bw property.
> >
> >                                    ??
> 
> Sorry, what's the question? Was this an accidental email?

Too much smartness is too bad sometimes, sorry about that :)

I placed the ?? right below "opp-peak-bw", there is no property like
that. You failed to update it :)

-- 
viresh