[PATCH v2 0/5] Add DSP node for i.MX8QXP board to be used by DSP SOF driver

From: Daniel Baluta
Date: Tue Jul 23 2019 - 04:41:12 EST


i.MX8QXP boards feature an Hifi4 DSP from Tensilica.

This patch series aims on adding the DT node describing the DSP,
but it also contains the Linux SOF DSP driver that will use the DT node
for easier review.

Note that we switched to the new yaml format for bindings documentation.

The DSP will run SOF Firmware [1]. Patches 1,2,3 are adding support
for Linux DSP driver are already sent for review to SOF folks [2]

[1] https://github.com/thesofproject/sof
[2] https://github.com/thesofproject/linux/pull/1048/commits

Changes since v1:
- removed 'clk: imx8: Add DSP related clocks' as it was already
applied by Shawn
- add patches adding support for Linux DSP driver to make things
clear for review
- add maxItems property for PM in DT bindings doc

Daniel Baluta (5):
ASoC: SOF: imx: Add i.MX8 HW support
ASoC: SOF: topology: Add dummy support for i.MX8 DAIs
ASoC: SOF: Add DT DSP device support
arm64: dts: imx8qxp: Add DSP DT node
dt-bindings: dsp: fsl: Add DSP core binding support

.../devicetree/bindings/dsp/fsl,dsp.yaml | 87 ++++
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 4 +
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 32 ++
include/sound/sof/dai.h | 2 +
include/uapi/sound/sof/tokens.h | 8 +
sound/soc/sof/Kconfig | 10 +
sound/soc/sof/Makefile | 4 +
sound/soc/sof/imx/Kconfig | 21 +
sound/soc/sof/imx/Makefile | 7 +
sound/soc/sof/imx/imx8.c | 464 ++++++++++++++++++
sound/soc/sof/sof-dt-dev.c | 159 ++++++
sound/soc/sof/topology.c | 30 ++
12 files changed, 828 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
create mode 100644 sound/soc/sof/imx/Kconfig
create mode 100644 sound/soc/sof/imx/Makefile
create mode 100644 sound/soc/sof/imx/imx8.c
create mode 100644 sound/soc/sof/sof-dt-dev.c

--
2.17.1