Re: [Intel-wired-lan] MDI errors during resume from ACPI S3 (suspend to ram)

[Paul Menzel]

Dear Sasha,


On 07.08.19 09:23, Neftin, Sasha wrote:
> On 8/6/2019 18:53, Mario.Limonciello@xxxxxxxx wrote:
>>> -----Original Message-----
>>> From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
>>> Sent: Tuesday, August 6, 2019 10:36 AM
>>> To: Jeff Kirsher
>>> Cc: intel-wired-lan@xxxxxxxxxxxxxxxx; Linux Kernel Mailing List; Limonciello, Mario
>>> Subject: MDI errors during resume from ACPI S3 (suspend to ram)
>>>
>>> Dear Linux folks,
>>>
>>>
>>> Trying to decrease the resume time of Linux 5.3-rc3 on the Dell OptiPlex
>>> 5040 with the device below
>>>
>>> ÂÂÂÂ $ lspci -nn -s 00:1f.6
>>> ÂÂÂÂ 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2)
>>> I219-V [8086:15b8] (rev 31)
>>>
>>> pm-graphâs script `sleepgraph.py` shows, that the driver *e1000e* takes
>>> around 400 ms, which is quite a lot. The call graph trace shows that
>>> `e1000e_read_phy_reg_mdic()` is responsible for a lot of those. From
>>> `drivers/net/ethernet/intel/e1000e/phy.c` [1]:
>>>
>>> ÂÂÂÂÂÂÂÂ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ udelay(50);
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ mdic = er32(MDIC);
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ if (mdic & E1000_MDIC_READY)
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ break;
>>> ÂÂÂÂÂÂÂÂ }
>>> ÂÂÂÂÂÂÂÂ if (!(mdic & E1000_MDIC_READY)) {
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ e_dbg("MDI Read did not complete\n");
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ return -E1000_ERR_PHY;
>>> ÂÂÂÂÂÂÂÂ }
>>> ÂÂÂÂÂÂÂÂ if (mdic & E1000_MDIC_ERROR) {
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ e_dbg("MDI Error\n");
>>> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ return -E1000_ERR_PHY;
>>> ÂÂÂÂÂÂÂÂ }
>>>
>>> Unfortunately, errors are not logged if dynamic debug is disabled,
>>> so rebuilding the Linux kernel with `CONFIG_DYNAMIC_DEBUG`, and
>>>
>>> ÂÂÂÂ echo "file drivers/net/ethernet/* +p" | sudo tee
>>> /sys/kernel/debug/dynamic_debug/control
>>>
>>> I got the messages below.
>>>
>>> ÂÂÂÂ [ 4159.204192] e1000e 0000:00:1f.6 net00: MDI Error
>>> ÂÂÂÂ [ 4160.267950] e1000e 0000:00:1f.6 net00: MDI Write did not complete
>>> ÂÂÂÂ [ 4160.359855] e1000e 0000:00:1f.6 net00: MDI Error
>>>
>>> Can you please shed a little more light into these errors? Please
>>> find the full log attached.

>>> [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/intel/e1000e/phy.c#n206
>>
>> Strictly as a reference point you may consider trying the out-of-tree driver to see if these
>> behaviors persist.
>>
>> https://sourceforge.net/projects/e1000/

I can try that in the next days.

> We are using external PHY. Required ~200 ms to complete MDIC
> transaction (depended on the project).

Are you referring to the out-of-tree driver?

> You need to take to consider this time before access to the PHY. I do
> not recommend decrease timer in a 'e1000e_read_phy_reg_mdic()'
> method. We could hit on wrong MDI access.
My point was more, if you know that more time is needed, before the MDI
setting(?) will succeed, why try it anyway and go into the error paths?
Isnât there some polling possible to find out, when MDI can be set up?


Kind regards,

Paul

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature