[PATCH] regulator: act8865: operating mode and suspend state support

From: Raag Jadav
Date: Tue Aug 13 2019 - 14:32:55 EST

Next message: Raag Jadav: "[PATCH] regulator: act8865 regulator modes and suspend states"
Previous message: Ivan Khoronzhuk: "Re: [PATCH bpf-next 2/3] xdp: xdp_umem: replace kmap on vmap for umem map"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Implement ->set_mode(), ->get_mode() and ->set_suspend_xx() hooks
for act8865 with unlocked expert registers.

Based on work done by Borris Brezillon on [1].
[1] https://www.spinics.net/lists/kernel/msg2942960.html

Signed-off-by: Raag Jadav <raagjadav@xxxxxxxxx>
Link: https://lore.kernel.org/r/1565721176-8955-2-git-send-email-raagjadav@xxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/regulator/act8865-regulator.c | 187 +++++++++++++++++++++++++-
1 file changed, 186 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 6a90d3c7a452..0fa97f934df4 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -19,6 +19,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>

/*
* ACT8600 Global Register Map.
@@ -90,23 +91,31 @@
*/
#define ACT8865_SYS_MODE 0x00
#define ACT8865_SYS_CTRL 0x01
+#define ACT8865_SYS_UNLK_REGS 0x0b
#define ACT8865_DCDC1_VSET1 0x20
#define ACT8865_DCDC1_VSET2 0x21
#define ACT8865_DCDC1_CTRL 0x22
+#define ACT8865_DCDC1_SUS 0x24
#define ACT8865_DCDC2_VSET1 0x30
#define ACT8865_DCDC2_VSET2 0x31
#define ACT8865_DCDC2_CTRL 0x32
+#define ACT8865_DCDC2_SUS 0x34
#define ACT8865_DCDC3_VSET1 0x40
#define ACT8865_DCDC3_VSET2 0x41
#define ACT8865_DCDC3_CTRL 0x42
+#define ACT8865_DCDC3_SUS 0x44
#define ACT8865_LDO1_VSET 0x50
#define ACT8865_LDO1_CTRL 0x51
+#define ACT8865_LDO1_SUS 0x52
#define ACT8865_LDO2_VSET 0x54
#define ACT8865_LDO2_CTRL 0x55
+#define ACT8865_LDO2_SUS 0x56
#define ACT8865_LDO3_VSET 0x60
#define ACT8865_LDO3_CTRL 0x61
+#define ACT8865_LDO3_SUS 0x62
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
+#define ACT8865_LDO4_SUS 0x66
#define ACT8865_MSTROFF 0x20

/*
@@ -225,6 +234,171 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};

+static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id, reg, val;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_SUS;
+ val = 0xe8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (enable)
+ val |= BIT(4);
+
+ /*
+ * Ask the PMIC to enable/disable this output when entering hibernate
+ * mode.
+ */
+ return regmap_write(regmap, reg, val);
+}
+
+static int act8865_set_suspend_enable(struct regulator_dev *rdev)
+{
+ return act8865_set_suspend_state(rdev, true);
+}
+
+static int act8865_set_suspend_disable(struct regulator_dev *rdev)
+{
+ return act8865_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8865_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case ACT8865_REGULATOR_MODE_FIXED:
+ return REGULATOR_MODE_FAST;
+ case ACT8865_REGULATOR_MODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case ACT8865_REGULATOR_MODE_LOWPOWER:
+ return REGULATOR_MODE_STANDBY;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev_get_id(rdev);
+ int reg, val = 0;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_CTRL;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_CTRL;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_CTRL;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_CTRL;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_CTRL;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_CTRL;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ case REGULATOR_MODE_NORMAL:
+ if (id <= ACT8865_ID_DCDC3)
+ val = BIT(5);
+ break;
+ case REGULATOR_MODE_STANDBY:
+ if (id > ACT8865_ID_DCDC3)
+ val = BIT(5);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(regmap, reg, BIT(5), val);
+}
+
+static unsigned int act8865_get_mode(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev_get_id(rdev);
+ int reg, ret, val = 0;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_CTRL;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_CTRL;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_CTRL;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_CTRL;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_CTRL;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_CTRL;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ if (id <= ACT8865_ID_DCDC3 && (val & BIT(5)))
+ return REGULATOR_MODE_FAST;
+ else if (id > ACT8865_ID_DCDC3 && !(val & BIT(5)))
+ return REGULATOR_MODE_NORMAL;
+ else
+ return REGULATOR_MODE_STANDBY;
+}
+
static const struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@@ -232,7 +406,11 @@ static const struct regulator_ops act8865_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8865_set_mode,
+ .get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8865_set_suspend_enable,
+ .set_suspend_disable = act8865_set_suspend_disable,
};

static const struct regulator_ops act8865_ldo_ops = {
@@ -242,7 +420,11 @@ static const struct regulator_ops act8865_ldo_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8865_set_mode,
+ .get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8865_set_suspend_enable,
+ .set_suspend_disable = act8865_set_suspend_disable,
.set_pull_down = regulator_set_pull_down_regmap,
};

@@ -256,6 +438,7 @@ static const struct regulator_ops act8865_fixed_ldo_ops = {
[_family##_ID_##_id] = { \
.name = _name, \
.of_match = of_match_ptr(_name), \
+ .of_map_mode = act8865_of_map_mode, \
.regulators_node = of_match_ptr("regulators"), \
.supply_name = _supply, \
.id = _family##_ID_##_id, \
@@ -590,7 +773,9 @@ static int act8865_pmic_probe(struct i2c_client *client,

i2c_set_clientdata(client, act8865);

- return 0;
+ /* Unlock expert registers for ACT8865. */
+ return type != ACT8865 ? 0 : regmap_write(act8865->regmap,
+ ACT8865_SYS_UNLK_REGS, 0xef);
}

static const struct i2c_device_id act8865_ids[] = {
--
2.20.1

Next message: Raag Jadav: "[PATCH] regulator: act8865 regulator modes and suspend states"
Previous message: Ivan Khoronzhuk: "Re: [PATCH bpf-next 2/3] xdp: xdp_umem: replace kmap on vmap for umem map"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]