Re: [PATCH v2] i2c: mediatek: disable zero-length transfers for mt8183

[Qii Wang]

On Thu, 2019-08-22 at 17:45 +0800, Hsin-Yi Wang wrote:
> When doing i2cdetect quick write mode, we would get transfer
> error ENOMEM, and i2cdetect shows there's no device at the address.
> Quoting from mt8183 datasheet, the number of transfers to be
> transferred in one transaction should be set to bigger than 1,
> so we should forbid zero-length transfer and update functionality.
> 
> Incorrect return:
> localhost ~ # i2cdetect -q -y 0
>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
> 00:          -- -- -- -- -- -- -- -- -- -- -- -- --
> 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 70: -- -- -- -- -- -- -- --
> 
> After this patch:
> localhost ~ #  i2cdetect -q -y 0
> Error: Can't use SMBus Quick Write command on this bus
> 
> localhost ~ #  i2cdetect -y 0
> Warning: Can't use SMBus Quick Write command, will skip some addresses
>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
> 00:
> 10:
> 20:
> 30: -- -- -- -- -- -- -- --
> 40:
> 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 60:
> 70:
> 
> Reported-by: Alexandru M Stan <amstan@xxxxxxxxxxxx>
> Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> ---
> Change from v1:
> * restore the order of algo and quirks
> ---
>  drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index 252edb433fdf..29eae1bf4f86 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -234,6 +234,10 @@ static const struct i2c_adapter_quirks mt7622_i2c_quirks = {
>  	.max_num_msgs = 255,
>  };
>  
> +static const struct i2c_adapter_quirks mt8183_i2c_quirks = {
> +	.flags = I2C_AQ_NO_ZERO_LEN,
> +};
> +
>  static const struct mtk_i2c_compatible mt2712_compat = {
>  	.regs = mt_i2c_regs_v1,
>  	.pmic_i2c = 0,
> @@ -298,6 +302,7 @@ static const struct mtk_i2c_compatible mt8173_compat = {
>  };
>  
>  static const struct mtk_i2c_compatible mt8183_compat = {
> +	.quirks = &mt8183_i2c_quirks,
>  	.regs = mt_i2c_regs_v2,
>  	.pmic_i2c = 0,
>  	.dcm = 0,
> @@ -870,7 +875,11 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
>  
>  static u32 mtk_i2c_functionality(struct i2c_adapter *adap)
>  {
> -	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +	if (adap->quirks->flags & I2C_AQ_NO_ZERO_LEN)
> +		return I2C_FUNC_I2C |
> +			(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
> +	else
> +		return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;

It can be removed?

>  }
>  
>  static const struct i2c_algorithm mtk_i2c_algorithm = {