[PATCH v2 0/7] add support USB for MT8183

From: Chunfeng Yun
Date: Wed Aug 28 2019 - 03:35:54 EST

This series support USB DRD controller and enable it's remote
wakeup functoin for MT8183, they depend on the following
series patches:

1. this series add support MT6358 PMIC
[v5,01/10] mfd: mt6397: clean up code

2. this series add support pericfg syscon
[1/2] dt-bindings: clock: mediatek: add pericfg for MT8183

3. add property mediatek,discth for tphy
[06/11] phy: phy-mtk-tphy: add a property for disconnect threshold

v2 changes:
add patch [7/7]

Chunfeng Yun (7):
dt-bindings: usb: mtu3: support USB wakeup for MT8183
dt-bindings: usb: mtk-xhci: support USB wakeup for MT8183
usb: mtu3: support ip-sleep wakeup for MT8183
usb: mtk-xhci: support ip-sleep wakeup for MT8183
arm64: dts: mt8183: add usb and phy nodes
arm64: dts: mt8183: enable USB remote wakeup
arm64: dts: mt8183: tune disconnect threshold of u2phy

.../bindings/usb/mediatek,mtk-xhci.txt | 1 +
.../devicetree/bindings/usb/mediatek,mtu3.txt | 1 +
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 23 +++++++
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 64 +++++++++++++++++++
drivers/usb/host/xhci-mtk.c | 14 +++-
drivers/usb/mtu3/mtu3_host.c | 14 +++-
6 files changed, 115 insertions(+), 2 deletions(-)