[PATCH 0/4] i3c: remove device if failed on pre_assign_dyn_addr()

From: Vitor Soares
Date: Thu Aug 29 2019 - 06:19:59 EST

This patch series remove the devices that fail during
pre_assign_dyn_addr() and were being sent on DEFSVLS command.
With the change above, during the i3c_master_add_i3c_dev_locked() is
necessary to check if the device has i3c_boardinfo and try to assign the
i3c_dev_boardinfo->init_dyn_addr if there no oldev. This change will
allow to describe in DT device with preferable dynamic address but without
static address.

Vitor Soares (4):
"i3c: detach and free device if pre_assign_dyn_addr fails "
i3c: check i3c_boardinfo during i3c_master_add_i3c_dev_locked
update i3c bingins
i3c: master: dw: Reattach device on first empty location of DAT

Documentation/devicetree/bindings/i3c/i3c.txt | 13 ++++++++---
drivers/i3c/master.c | 33 ++++++++++++++++++++++++---
drivers/i3c/master/dw-i3c-master.c | 16 +++++++++++++
3 files changed, 56 insertions(+), 6 deletions(-)