[PATCH] Bluetooth: btusb: Use cmd_timeout to reset Realtek device

[Alex Lu]

From: Alex Lu <alex_lu@xxxxxxxxxxxxxx>

Realtek Bluetooth controller provides a BT_DIS reset pin for hardware
reset of it. The cmd_timeout is helpful on Realtek bluetooth controller
where the firmware gets stuck.

Signed-off-by: Alex Lu <alex_lu@xxxxxxxxxxxxxx>
---
 drivers/bluetooth/btusb.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 31d3febed187..a626de3a3f4c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -489,16 +489,19 @@ struct btusb_data {
 	int (*setup_on_usb)(struct hci_dev *hdev);
 
 	int oob_wake_irq;   /* irq for out-of-band wake-on-bt */
-	unsigned cmd_timeout_cnt;
+	unsigned int cmd_timeout_cnt;
+	unsigned int cmd_timeout_max;
+	unsigned int reset_msecs;
+	int reset_gpio_value;
 };
 
 
-static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
+static void btusb_cmd_timeout(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	struct gpio_desc *reset_gpio = data->reset_gpio;
 
-	if (++data->cmd_timeout_cnt < 5)
+	if (++data->cmd_timeout_cnt < data->cmd_timeout_max)
 		return;
 
 	if (!reset_gpio) {
@@ -519,9 +522,9 @@ static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
 	}
 
 	bt_dev_err(hdev, "Initiating HW reset via gpio");
-	gpiod_set_value_cansleep(reset_gpio, 1);
-	msleep(100);
-	gpiod_set_value_cansleep(reset_gpio, 0);
+	gpiod_set_value_cansleep(reset_gpio, data->reset_gpio_value);
+	msleep(data->reset_msecs);
+	gpiod_set_value_cansleep(reset_gpio, !data->reset_gpio_value);
 }
 
 static inline void btusb_free_frags(struct btusb_data *data)
@@ -3723,7 +3726,10 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->shutdown = btusb_shutdown_intel;
 		hdev->set_diag = btintel_set_diag_mfg;
 		hdev->set_bdaddr = btintel_set_bdaddr;
-		hdev->cmd_timeout = btusb_intel_cmd_timeout;
+		hdev->cmd_timeout = btusb_cmd_timeout;
+		data->cmd_timeout_max = 5;
+		data->reset_msecs = 100;
+		data->reset_gpio_value = 1;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
@@ -3737,7 +3743,10 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->hw_error = btintel_hw_error;
 		hdev->set_diag = btintel_set_diag;
 		hdev->set_bdaddr = btintel_set_bdaddr;
-		hdev->cmd_timeout = btusb_intel_cmd_timeout;
+		hdev->cmd_timeout = btusb_cmd_timeout;
+		data->cmd_timeout_max = 5;
+		data->reset_msecs = 100;
+		data->reset_gpio_value = 1;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
@@ -3783,6 +3792,10 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_REALTEK) {
 		hdev->setup = btrtl_setup_realtek;
 		hdev->shutdown = btrtl_shutdown_realtek;
+		hdev->cmd_timeout = btusb_cmd_timeout;
+		data->cmd_timeout_max = 5;
+		data->reset_msecs = 200;
+		data->reset_gpio_value = 0;
 
 		/* Realtek devices lose their updated firmware over global
 		 * suspend that means host doesn't send SET_FEATURE
-- 
2.21.0