[PATCH v3 1/5] i3c: master: detach/free devices fail on pre_assign_dyn_addr()

[Vitor Soares]

As for today, the I3C framework is keeping in memory and master->bus.devs
list the devices that fail during pre_assign_dyn_addr() and send them on
DEFSLVS command.

According to MIPI I3C Bus spec the DEFSLVS command is used to inform any
Secondary Master about the Dynamic Addresses that were assigned to I3C
devices and the I2C devices present on the bus.

This issue could be fixed by changing i3c_master_defslvs_locked() to
ignore unaddressed i3c devices but the i3c_dev_desc would be allocated and
attached to HC unnecessarily. This can cause that some HC aren't able to
do DAA for HJ capable devices due to lack of space in controller.

Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
---
Changes in v3:
  - Change commit message

Changes in v2:
  - Move out detach/free the i3c_dev_desc from pre_assign_dyn_addr()
  - Convert i3c_master_pre_assign_dyn_addr() to return an int

 drivers/i3c/master.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 5f4bd52..586e34f 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1426,19 +1426,19 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
 		master->ops->detach_i2c_dev(dev);
 }
 
-static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
+static int i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
 {
 	struct i3c_master_controller *master = i3c_dev_get_master(dev);
 	int ret;
 
 	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
 	    !dev->boardinfo->static_addr)
-		return;
+		return 0;
 
 	ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
 					dev->boardinfo->init_dyn_addr);
 	if (ret)
-		return;
+		return ret;
 
 	dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
 	ret = i3c_master_reattach_i3c_dev(dev, 0);
@@ -1449,10 +1449,12 @@ static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
 	if (ret)
 		goto err_rstdaa;
 
-	return;
+	return 0;
 
 err_rstdaa:
 	i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
+
+	return ret;
 }
 
 static void
@@ -1647,7 +1649,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 	enum i3c_addr_slot_status status;
 	struct i2c_dev_boardinfo *i2cboardinfo;
 	struct i3c_dev_boardinfo *i3cboardinfo;
-	struct i3c_dev_desc *i3cdev;
+	struct i3c_dev_desc *i3cdev, *i3ctmp;
 	struct i2c_dev_desc *i2cdev;
 	int ret;
 
@@ -1746,8 +1748,14 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 	 * Pre-assign dynamic address and retrieve device information if
 	 * needed.
 	 */
-	i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
-		i3c_master_pre_assign_dyn_addr(i3cdev);
+	list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
+				 common.node) {
+		ret = i3c_master_pre_assign_dyn_addr(i3cdev);
+		if (ret) {
+			i3c_master_detach_i3c_dev(i3cdev);
+			i3c_master_free_i3c_dev(i3cdev);
+		}
+	}
 
 	ret = i3c_master_do_daa(master);
 	if (ret)
-- 
2.7.4