[PATCH 0/5] Initialise thermal framework earlier during boot

[Amit Kucheria]

Device boot needs to be as fast as possible while keeping under the thermal
envelope. Now that thermal framework is built-in to the kernel, we can
initialize it earlier to enable thermal mitigation during boot.

We also need the cpufreq HW drivers to be initialised earlier to act as the
cooling devices. This series only converts over the qcom-hw driver to
initialize earlier but can be extended to other platforms as well.


Amit Kucheria (4):
  cpufreq: Initialise the governors in core_initcall
  cpufreq: Initialize cpufreq-dt driver earlier
  clk: qcom: Initialise clock drivers earlier
  cpufreq: qcom-hw: Move driver initialisation earlier

Lina Iyer (1):
  thermal: Initialize thermal subsystem earlier

 drivers/clk/qcom/clk-rpmh.c            |  2 +-
 drivers/clk/qcom/gcc-qcs404.c          |  2 +-
 drivers/clk/qcom/gcc-sdm845.c          |  2 +-
 drivers/cpufreq/cpufreq-dt-platdev.c   |  2 +-
 drivers/cpufreq/cpufreq_conservative.c |  2 +-
 drivers/cpufreq/cpufreq_ondemand.c     |  2 +-
 drivers/cpufreq/cpufreq_performance.c  |  2 +-
 drivers/cpufreq/cpufreq_powersave.c    |  2 +-
 drivers/cpufreq/cpufreq_userspace.c    |  2 +-
 drivers/cpufreq/qcom-cpufreq-hw.c      |  2 +-
 drivers/thermal/thermal_core.c         | 41 +++++++++++++++-----------
 11 files changed, 34 insertions(+), 27 deletions(-)

-- 
2.17.1