Re: [PATCH 1/3] dt-bindings: dma: Add documentation for DMA domains

From: Peter Ujfalusi
Date: Mon Sep 16 2019 - 07:21:28 EST




On 13/09/2019 17.36, Rob Herring wrote:
> On Tue, Sep 10, 2019 at 02:50:35PM +0300, Peter Ujfalusi wrote:
>> On systems where multiple DMA controllers available, non Slave (for example
>> memcpy operation) users can not be described in DT as there is no device
>> involved from the DMA controller's point of view, DMA binding is not usable.
>> However in these systems still a peripheral might need to be serviced by or
>> it is better to serviced by specific DMA controller.
>> When a memcpy is used to/from a memory mapped region for example a DMA in the
>> same domain can perform better.
>> For generic software modules doing mem 2 mem operations it also matter that
>> they will get a channel from a controller which is faster in DDR to DDR mode
>> rather then from the first controller happen to be loaded.
>>
>> This property is inherited, so it may be specified in a device node or in any
>> of its parent nodes.
>
> If a device needs mem2mem dma, I think we should just use the existing
> dma binding. The provider will need a way to define cell values which
> mean mem2mem.

But isn't it going to be an abuse of the binding? Each DMA controller
would hack this in different ways, probably using out of range DMA
request/trigger number or if they have direction in the binding or some
other parameter would be set to something invalid...

> For generic s/w, it should be able to query the dma speed or get a
> preferred one IMO. It's not a DT problem.
>
> We measure memcpy speeds at boot time to select the fastest
> implementation for a chip, why not do that for mem2mem DMA?

It would make an impact on boot time since the tests would need to be
done with a large enough copy to be able to see clearly which one is faster.

Also we should be able to handle different probing orders:
client1 should have mem2mem channel from dma2.

- dma1 probes
- client1 probes and asks for a mem2mem channel
- dma2 probes

Here client1 should deffer until dma2 is probed.

Probably the property should be dma-mem2mem-domain to be more precise on
it's purpose and avoid confusion?

>
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>> ---
>> .../devicetree/bindings/dma/dma-domain.yaml | 88 +++++++++++++++++++
>> 1 file changed, 88 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/dma/dma-domain.yaml
>
> Note that you have several errors in your schema. Run 'make dt_bindings_check'.

That does not do anything on my system, but git dt-doc-validate running
via https://github.com/robherring/yaml-bindings.git.

- PÃter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki