[PATCH v4 09/15] arm64: dts: msm8996: thermal: Add interrupt support
From: Amit Kucheria
Date: Fri Sep 20 2019 - 17:53:39 EST
Register upper-lower interrupts for each of the two tsens controllers.
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 60 ++++++++++++++-------------
1 file changed, 32 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 96c0a481f454..bb763b362c16 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -175,8 +175,8 @@
thermal-zones {
cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
@@ -196,8 +196,8 @@
};
cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
@@ -217,8 +217,8 @@
};
cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
@@ -238,8 +238,8 @@
};
cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
@@ -259,8 +259,8 @@
};
gpu-thermal-top {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 6>;
@@ -274,8 +274,8 @@
};
gpu-thermal-bottom {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 7>;
@@ -289,8 +289,8 @@
};
m4m-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
@@ -304,8 +304,8 @@
};
l3-or-venus-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
@@ -319,8 +319,8 @@
};
cluster0-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
@@ -334,8 +334,8 @@
};
cluster1-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
@@ -349,8 +349,8 @@
};
camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 1>;
@@ -364,8 +364,8 @@
};
q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 2>;
@@ -379,8 +379,8 @@
};
mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 3>;
@@ -394,8 +394,8 @@
};
modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 4>;
@@ -591,6 +591,8 @@
reg = <0x4a9000 0x1000>, /* TM */
<0x4a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
@@ -599,6 +601,8 @@
reg = <0x4ad000 0x1000>, /* TM */
<0x4ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
--
2.17.1