[PATCH v5 2/3] dt-bindings: leds: document the "power-supply" property
From: Jean-Jacques Hiblot
Date: Mon Sep 23 2019 - 06:21:22 EST
Most of the LEDs are powered by a voltage/current regulator. Describing it
in the device-tree makes it possible for the LED core to enable/disable it
when needed.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
---
Documentation/devicetree/bindings/leds/common.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 9fa6f9795d50..54857c16573d 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -77,6 +77,11 @@ Optional properties for child nodes:
- panic-indicator : This property specifies that the LED should be used,
if at all possible, as a panic indicator.
+- power-supply : A voltage/current regulator used to to power the LED. When a
+ LED is turned off, the LED core disable its regulator. The
+ same regulator can power many LED (or other) devices. It is
+ turned off only when all of its users disabled it.
+
- trigger-sources : List of devices which should be used as a source triggering
this LED activity. Some LEDs can be related to a specific
device and should somehow indicate its state. E.g. USB 2.0
@@ -124,6 +129,7 @@ led-controller@0 {
function = LED_FUNCTION_STATUS;
linux,default-trigger = "heartbeat";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ power-supply = <&led_regulator>;
};
led1 {
--
2.17.1