[PATCH 5.2 292/313] md/raid6: Set R5_ReadError when there is read failure on parity disk

[Greg Kroah-Hartman]

From: Xiao Ni <xni@xxxxxxxxxx>

commit 143f6e733b73051cd22dcb80951c6c929da413ce upstream.

7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in
RAID6.") avoids rereading P when it can be computed from other members.
However, this misses the chance to re-write the right data to P. This
patch sets R5_ReadError if the re-read fails.

Also, when re-read is skipped, we also missed the chance to reset
rdev->read_errors to 0. It can fail the disk when there are many read
errors on P member disk (other disks don't have read error)

V2: upper layer read request don't read parity/Q data. So there is no
need to consider such situation.

This is Reported-by: kbuild test robot <lkp@xxxxxxxxx>

Fixes: 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.")
Cc: <stable@xxxxxxxxxxxxxxx> #4.4+
Signed-off-by: Xiao Ni <xni@xxxxxxxxxx>
Signed-off-by: Song Liu <songliubraving@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/md/raid5.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2559,7 +2559,9 @@ static void raid5_end_read_request(struc
 		    && !test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
 			retry = 1;
 		if (retry)
-			if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
+			if (sh->qd_idx >= 0 && sh->pd_idx == i)
+				set_bit(R5_ReadError, &sh->dev[i].flags);
+			else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
 				set_bit(R5_ReadError, &sh->dev[i].flags);
 				clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);
 			} else