Re: [MANPAGE PATCH] Add manpage for fsopen(2), fspick(2) and fsmount(2)

[Michael Kerrisk (man-pages)]

Hello David,

See my previous mail.

With respect to the patch below, would you be willing to review
the content of this man-pages patch to see if it accurately reflects 
what was merged into the kernel, and then resubmit please?

Thanks,

Michael

On 7/11/18 12:54 AM, David Howells wrote:
> Add a manual page to document the fsopen(), fspick() and fsmount() system
> calls.
> 
> Signed-off-by: David Howells <dhowells@xxxxxxxxxx>
> ---
> 
>  man2/fsmount.2 |    1 
>  man2/fsopen.2  |  357 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  man2/fspick.2  |    1 
>  3 files changed, 359 insertions(+)
>  create mode 100644 man2/fsmount.2
>  create mode 100644 man2/fsopen.2
>  create mode 100644 man2/fspick.2
> 
> diff --git a/man2/fsmount.2 b/man2/fsmount.2
> new file mode 100644
> index 000000000..2bf59fc3e
> --- /dev/null
> +++ b/man2/fsmount.2
> @@ -0,0 +1 @@
> +.so man2/fsopen.2
> diff --git a/man2/fsopen.2 b/man2/fsopen.2
> new file mode 100644
> index 000000000..1bc761ab4
> --- /dev/null
> +++ b/man2/fsopen.2
> @@ -0,0 +1,357 @@
> +'\" t
> +.\" Copyright (c) 2018 David Howells <dhowells@xxxxxxxxxx>
> +.\"
> +.\" %%%LICENSE_START(VERBATIM)
> +.\" Permission is granted to make and distribute verbatim copies of this
> +.\" manual provided the copyright notice and this permission notice are
> +.\" preserved on all copies.
> +.\"
> +.\" Permission is granted to copy and distribute modified versions of this
> +.\" manual under the conditions for verbatim copying, provided that the
> +.\" entire resulting derived work is distributed under the terms of a
> +.\" permission notice identical to this one.
> +.\"
> +.\" Since the Linux kernel and libraries are constantly changing, this
> +.\" manual page may be incorrect or out-of-date.  The author(s) assume no
> +.\" responsibility for errors or omissions, or for damages resulting from
> +.\" the use of the information contained herein.  The author(s) may not
> +.\" have taken the same level of care in the production of this manual,
> +.\" which is licensed free of charge, as they might when working
> +.\" professionally.
> +.\"
> +.\" Formatted or processed versions of this manual, if unaccompanied by
> +.\" the source, must acknowledge the copyright and authors of this work.
> +.\" %%%LICENSE_END
> +.\"
> +.TH FSOPEN 2 2018-06-07 "Linux" "Linux Programmer's Manual"
> +.SH NAME
> +fsopen, fsmount, fspick \- Handle filesystem (re-)configuration and mounting
> +.SH SYNOPSIS
> +.nf
> +.B #include <sys/types.h>
> +.br
> +.B #include <sys/mount.h>
> +.br
> +.B #include <unistd.h>
> +.br
> +.BR "#include <fcntl.h>           " "/* Definition of AT_* constants */"
> +.PP
> +.BI "int fsopen(const char *" fsname ", unsigned int " flags );
> +.PP
> +.BI "int fsmount(int " fd ", unsigned int " flags ", unsigned int " ms_flags );
> +.PP
> +.BI "int fspick(int " dirfd ", const char *" pathname ", unsigned int " flags );
> +.fi
> +.PP
> +.IR Note :
> +There are no glibc wrappers for these system calls.
> +.SH DESCRIPTION
> +.PP
> +.BR fsopen ()
> +creates a new filesystem configuration context within the kernel for the
> +filesystem named in the
> +.I fsname
> +parameter and attaches it to a file descriptor, which it then returns.  The
> +file descriptor can be marked close-on-exec by setting
> +.B FSOPEN_CLOEXEC
> +in flags.
> +.PP
> +The
> +file descriptor can then be used to configure the desired filesystem parameters
> +and security parameters by using
> +.BR write (2)
> +to pass parameters to it and then writing a command to actually create the
> +filesystem representation.
> +.PP
> +The file descriptor also serves as a channel by which more comprehensive error,
> +warning and information messages may be retrieved from the kernel using
> +.BR read (2).
> +.PP
> +Once the kernel's filesystem representation has been created, it can be queried
> +by calling
> +.BR fsinfo (2)
> +on the file descriptor.  fsinfo() will spot that the target is actually a
> +creation context and look inside that.
> +.PP
> +.BR fsmount ()
> +can then be called to create a mount object that refers to the newly created
> +filesystem representation, with the propagation and mount restrictions to be
> +applied specified in
> +.IR ms_flags .
> +The mount object is then attached to a new file descriptor that looks like one
> +created by
> +.BR open "(2) with " O_PATH " or " open_tree (2).
> +This can be passed to
> +.BR move_mount (2)
> +to attach the mount object to a mountpoint, thereby completing the process.
> +.PP
> +The file descriptor returned by fsmount() is marked close-on-exec if
> +FSMOUNT_CLOEXEC is specified in
> +.IR flags .
> +.PP
> +After fsmount() has completed, the context created by fsopen() is reset and
> +moved to reconfiguration state, allowing the new superblock to be reconfigured.
> +.PP
> +.BR fspick ()
> +creates a new filesystem context within the kernel, attaches the superblock
> +specified by
> +.IR dfd ", " pathname ", " flags
> +and puts it into the reconfiguration state and attached the context to a new
> +file descriptor that can then be parameterised with
> +.BR write (2)
> +exactly the same as for the context created by fsopen() above.
> +.PP
> +.I flags
> +is an OR'd together mask of
> +.B FSPICK_CLOEXEC
> +which indicates that the returned file descriptor should be marked
> +close-on-exec and
> +.BR FSPICK_SYMLINK_NOFOLLOW ", " FSPICK_NO_AUTOMOUNT " and " FSPICK_EMPTY_PATH
> +which control the pathwalk to the target object (see below).
> +
> +.\"________________________________________________________
> +.SS Writable Command Interface
> +Superblock (re-)configuration is achieved by writing command strings to the
> +context file descriptor using
> +.BR write (2).
> +Each string is prefixed with a specifier indicating the class of command
> +being specified.  The available commands include:
> +.TP
> +\fB"o <option>"\fP
> +Specify a filesystem or security parameter.
> +.I <option>
> +is typically a key or key=val format string.  Since the length of the option is
> +given to write(), the option may include any sort of character, including
> +spaces and commas or even binary data.
> +.TP
> +\fB"s <name>"\fP
> +Specify a device file, network server or other other source specification.
> +This may be optional, depending on the filesystem, and it may be possible to
> +provide multiple of them to a filesystem.
> +.TP
> +\fB"x create"\fP
> +End the filesystem configuration phase and try and create a representation in
> +the kernel with the parameters specified.  After this, the context is shifted
> +to the mount-pending state waiting for an fsmount() call to occur.
> +.TP
> +\fB"x reconfigure"\fP
> +End a filesystem reconfiguration phase try to apply the parameters to the
> +filesystem representation.  After this, the context gets reset and put back to
> +the start of the reconfiguration phase again.
> +.PP
> +With this interface, option strings are not limited to 4096 bytes, either
> +individually or in sum, and they are also not restricted to text-only options.
> +Further, errors may be given individually for each option and not aggregated or
> +dumped into the kernel log.
> +
> +.\"________________________________________________________
> +.SS Message Retrieval Interface
> +The context file descriptor may be queried for message strings at any time by
> +calling
> +.BR read (2)
> +on the file descriptor.  This will return formatted messages that are prefixed
> +to indicate their class:
> +.TP
> +\fB"e <message>"\fP
> +An error message string was logged.
> +.TP
> +\fB"i <message>"\fP
> +An informational message string was logged.
> +.TP
> +\fB"w <message>"\fP
> +An warning message string was logged.
> +.PP
> +Messages are removed from the queue as they're read.
> +
> +.\"________________________________________________________
> +.SH EXAMPLES
> +To illustrate the process, here's an example whereby this can be used to mount
> +an ext4 filesystem on /dev/sdb1 onto /mnt.  Note that the example ignores the
> +fact that
> +.BR write (2)
> +has a length parameter and that errors might occur.
> +.PP
> +.in +4n
> +.nf
> +sfd = fsopen("ext4", FSOPEN_CLOEXEC);
> +write(sfd, "s /dev/sdb1");
> +write(sfd, "o noatime");
> +write(sfd, "o acl");
> +write(sfd, "o user_attr");
> +write(sfd, "o iversion");
> +write(sfd, "x create");
> +fsinfo(sfd, NULL, ...);
> +mfd = fsmount(sfd, FSMOUNT_CLOEXEC, MS_RELATIME);
> +move_mount(mfd, "", sfd, AT_FDCWD, "/mnt", MOVE_MOUNT_F_EMPTY_PATH);
> +.fi
> +.in
> +.PP
> +Here, an ext4 context is created first and attached to sfd.  This is then told
> +where its source will be, given a bunch of options and created.
> +.BR fsinfo (2)
> +can then be used to query the filesystem.  Then fsmount() is called to create a
> +mount object and
> +.BR move_mount (2)
> +is called to attach it to its intended mountpoint.
> +.PP
> +And here's an example of mounting from an NFS server:
> +.PP
> +.in +4n
> +.nf
> +sfd = fsopen("nfs", 0);
> +write(sfd, "s example.com/pub/linux");
> +write(sfd, "o nfsvers=3");
> +write(sfd, "o rsize=65536");
> +write(sfd, "o wsize=65536");
> +write(sfd, "o rdma");
> +write(sfd, "x create");
> +mfd = fsmount(sfd, 0, MS_NODEV);
> +move_mount(mfd, "", sfd, AT_FDCWD, "/mnt", MOVE_MOUNT_F_EMPTY_PATH);
> +.fi
> +.in
> +.PP
> +Reconfiguration can be achieved by:
> +.PP
> +.in +4n
> +.nf
> +sfd = fspick(AT_FDCWD, "/mnt", FSPICK_NO_AUTOMOUNT | FSPICK_CLOEXEC);
> +write(sfd, "o ro");
> +write(sfd, "x reconfigure");
> +.fi
> +.in
> +.PP
> +or:
> +.PP
> +.in +4n
> +.nf
> +sfd = fsopen(...);
> +...
> +mfd = fsmount(sfd, ...);
> +...
> +write(sfd, "o ro");
> +write(sfd, "x reconfigure");
> +.fi
> +.in
> +
> +
> +.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> +.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> +.\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> +.SH RETURN VALUE
> +On success, all three functions return a file descriptor.  On error, \-1 is
> +returned, and
> +.I errno
> +is set appropriately.
> +.SH ERRORS
> +The error values given below result from filesystem type independent
> +errors.
> +Each filesystem type may have its own special errors and its
> +own special behavior.
> +See the Linux kernel source code for details.
> +.TP
> +.B EACCES
> +A component of a path was not searchable.
> +(See also
> +.BR path_resolution (7).)
> +.TP
> +.B EACCES
> +Mounting a read-only filesystem was attempted without giving the
> +.B MS_RDONLY
> +flag.
> +.TP
> +.B EACCES
> +The block device
> +.I source
> +is located on a filesystem mounted with the
> +.B MS_NODEV
> +option.
> +.\" mtk: Probably: write permission is required for MS_BIND, with
> +.\" the error EPERM if not present; CAP_DAC_OVERRIDE is required.
> +.TP
> +.B EBUSY
> +.I source
> +cannot be reconfigured read-only, because it still holds files open for
> +writing.
> +.TP
> +.B EFAULT
> +One of the pointer arguments points outside the user address space.
> +.TP
> +.B EINVAL
> +.I source
> +had an invalid superblock.
> +.TP
> +.B EINVAL
> +.I ms_flags
> +includes more than one of
> +.BR MS_SHARED ,
> +.BR MS_PRIVATE ,
> +.BR MS_SLAVE ,
> +or
> +.BR MS_UNBINDABLE .
> +.TP
> +.BR EINVAL
> +An attempt was made to bind mount an unbindable mount.
> +.TP
> +.B ELOOP
> +Too many links encountered during pathname resolution.
> +.TP
> +.B EMFILE
> +The system has too many open files to create more.
> +.TP
> +.B ENFILE
> +The process has too many open files to create more.
> +.TP
> +.B ENAMETOOLONG
> +A pathname was longer than
> +.BR MAXPATHLEN .
> +.TP
> +.B ENODEV
> +Filesystem
> +.I fsname
> +not configured in the kernel.
> +.TP
> +.B ENOENT
> +A pathname was empty or had a nonexistent component.
> +.TP
> +.B ENOMEM
> +The kernel could not allocate sufficient memory to complete the call.
> +.TP
> +.B ENOTBLK
> +.I source
> +is not a block device (and a device was required).
> +.TP
> +.B ENOTDIR
> +.IR pathname ,
> +or a prefix of
> +.IR source ,
> +is not a directory.
> +.TP
> +.B ENXIO
> +The major number of the block device
> +.I source
> +is out of range.
> +.TP
> +.B EPERM
> +The caller does not have the required privileges.
> +.SH CONFORMING TO
> +These functions are Linux-specific and should not be used in programs intended
> +to be portable.
> +.SH VERSIONS
> +.BR fsopen "(), " fsmount "() and " fspick ()
> +were added to Linux in kernel 4.18.
> +.SH NOTES
> +Glibc does not (yet) provide a wrapper for the
> +.BR fsopen "() , " fsmount "() or " fspick "()"
> +system calls; call them using
> +.BR syscall (2).
> +.SH SEE ALSO
> +.BR mountpoint (1),
> +.BR move_mount (2),
> +.BR open_tree (2),
> +.BR umount (2),
> +.BR mount_namespaces (7),
> +.BR path_resolution (7),
> +.BR findmnt (8),
> +.BR lsblk (8),
> +.BR mount (8),
> +.BR umount (8)
> diff --git a/man2/fspick.2 b/man2/fspick.2
> new file mode 100644
> index 000000000..2bf59fc3e
> --- /dev/null
> +++ b/man2/fspick.2
> @@ -0,0 +1 @@
> +.so man2/fsopen.2
> 


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/