Re: [PATCH 3/5] dt-bindings: thermal: Add generic power domain warming device binding
From: Thara Gopinath
Date: Wed Oct 09 2019 - 08:18:21 EST
Thanks for the review
On 09/30/2019 10:42 AM, Rob Herring wrote:
> On Tue, Sep 10, 2019 at 01:14:34PM -0400, Thara Gopinath wrote:
>> Add binding to define power domains as thermal warming
>> Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
>> .../bindings/thermal/pwr-domain-warming.txt | 32 ++++++++++++++++++++++
>> 1 file changed, 32 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/thermal/pwr-domain-warming.txt
>> diff --git a/Documentation/devicetree/bindings/thermal/pwr-domain-warming.txt b/Documentation/devicetree/bindings/thermal/pwr-domain-warming.txt
>> new file mode 100644
>> index 0000000..25fc568
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/pwr-domain-warming.txt
>> @@ -0,0 +1,32 @@
>> +* Generic power domain based thermal warming device.
>> +This binding describes the power domains that can be used as a
>> +thermal warming device.
> This looks like just a gathering of properties and way to instantiate
> some driver.
> I think this all belongs in the power domain provider. Make it a cooling
> device and you should know which domains are relevant based on the
> compatible (though perhaps we could consider a list in DT). If you want
> to instantiate a separate driver to handle this, then make the power
> domain driver do that.
This sounds fine. A list in DT might be needed though. I have a separate
driver. I should be able to get the genpd provider driver call
into it. I had asked this to Ulf and he seemed to be fine with it as well