Re: [PATCH 2/2] PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI

From: Kuppuswamy Sathyanarayanan
Date: Wed Oct 09 2019 - 18:57:10 EST



On 10/9/19 3:45 PM, Bjorn Helgaas wrote:
From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

pci_prg_resp_pasid_required() returns the value of the "PRG Response PASID
Required" bit from the PRI capability, but the interface was previously
defined under #ifdef CONFIG_PCI_PASID.

Move it from CONFIG_PCI_PASID to CONFIG_PCI_PRI so it's with the other
PRI-related things.

Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
---
drivers/pci/ats.c | 55 +++++++++++++++++++----------------------
include/linux/pci-ats.h | 11 ++++-----
2 files changed, 30 insertions(+), 36 deletions(-)

diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index e18499243f84..0d06177252c7 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -280,6 +280,31 @@ int pci_reset_pri(struct pci_dev *pdev)
return 0;
}
EXPORT_SYMBOL_GPL(pci_reset_pri);
+
+/**
+ * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
+ * status.
+ * @pdev: PCI device structure
+ *
+ * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
+ */
+int pci_prg_resp_pasid_required(struct pci_dev *pdev)
+{
+ u16 status;
+ int pos;
+
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
+ if (!pos)
+ return 0;
+
+ pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
+
+ if (status & PCI_PRI_STATUS_PASID)
+ return 1;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
#endif /* CONFIG_PCI_PRI */
#ifdef CONFIG_PCI_PASID
@@ -395,36 +420,6 @@ int pci_pasid_features(struct pci_dev *pdev)
}
EXPORT_SYMBOL_GPL(pci_pasid_features);
-/**
- * pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
- * status.
- * @pdev: PCI device structure
- *
- * Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
- *
- * Even though the PRG response PASID status is read from PRI Status
- * Register, since this API will mainly be used by PASID users, this
- * function is defined within #ifdef CONFIG_PCI_PASID instead of
- * CONFIG_PCI_PRI.
- */
-int pci_prg_resp_pasid_required(struct pci_dev *pdev)
-{
- u16 status;
- int pos;
-
- pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
- if (!pos)
- return 0;
-
- pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
-
- if (status & PCI_PRI_STATUS_PASID)
- return 1;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
-
#define PASID_NUMBER_SHIFT 8
#define PASID_NUMBER_MASK (0x1f << PASID_NUMBER_SHIFT)
/**
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index 1ebb88e7c184..a7a2b3d94fcc 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -10,6 +10,7 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs);
void pci_disable_pri(struct pci_dev *pdev);
void pci_restore_pri_state(struct pci_dev *pdev);
int pci_reset_pri(struct pci_dev *pdev);
+int pci_prg_resp_pasid_required(struct pci_dev *pdev);
#else /* CONFIG_PCI_PRI */
@@ -31,6 +32,10 @@ static inline int pci_reset_pri(struct pci_dev *pdev)
return -ENODEV;
}
+static inline int pci_prg_resp_pasid_required(struct pci_dev *pdev)
+{
+ return 0;
+}
#endif /* CONFIG_PCI_PRI */
#ifdef CONFIG_PCI_PASID
@@ -40,7 +45,6 @@ void pci_disable_pasid(struct pci_dev *pdev);
void pci_restore_pasid_state(struct pci_dev *pdev);
int pci_pasid_features(struct pci_dev *pdev);
int pci_max_pasids(struct pci_dev *pdev);
-int pci_prg_resp_pasid_required(struct pci_dev *pdev);
#else /* CONFIG_PCI_PASID */
@@ -66,11 +70,6 @@ static inline int pci_max_pasids(struct pci_dev *pdev)
{
return -EINVAL;
}
-
-static inline int pci_prg_resp_pasid_required(struct pci_dev *pdev)
-{
- return 0;
-}
#endif /* CONFIG_PCI_PASID */

--
Sathyanarayanan Kuppuswamy
Linux kernel developer