Re: [PATCH] Revert "Bluetooth: hci_ll: set operational frequency earlier"

From: Adam Ford
Date: Wed Oct 16 2019 - 12:19:15 EST


On Wed, Oct 2, 2019 at 3:31 PM Sebastian Reichel <sre@xxxxxxxxxx> wrote:
>
> Hi,
>
> On Wed, Oct 02, 2019 at 06:46:26AM -0500, Adam Ford wrote:
> > As nice as it would be to update firmware faster, that patch broke
> > at least two different boards, an OMAP4+WL1285 based Motorola Droid
> > 4, as reported by Sebasian Reichel and the Logic PD i.MX6Q +
> > WL1837MOD.
> >
> > This reverts commit a2e02f38eff84f199c8e32359eb213f81f270047.
> >
> > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
>
> Acked-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
>
> This should be backported stable

Is there any chance of this getting picked up for the 5.4 kernel?
It's been a couple weeks, and I haven't seen any responses beyond
Sebastian's Ack and request for backport.

adam

>
> -- Sebastian
>
> > diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
> > index 285706618f8a..d9a4c6c691e0 100644
> > --- a/drivers/bluetooth/hci_ll.c
> > +++ b/drivers/bluetooth/hci_ll.c
> > @@ -621,13 +621,6 @@ static int ll_setup(struct hci_uart *hu)
> >
> > serdev_device_set_flow_control(serdev, true);
> >
> > - if (hu->oper_speed)
> > - speed = hu->oper_speed;
> > - else if (hu->proto->oper_speed)
> > - speed = hu->proto->oper_speed;
> > - else
> > - speed = 0;
> > -
> > do {
> > /* Reset the Bluetooth device */
> > gpiod_set_value_cansleep(lldev->enable_gpio, 0);
> > @@ -639,20 +632,6 @@ static int ll_setup(struct hci_uart *hu)
> > return err;
> > }
> >
> > - if (speed) {
> > - __le32 speed_le = cpu_to_le32(speed);
> > - struct sk_buff *skb;
> > -
> > - skb = __hci_cmd_sync(hu->hdev,
> > - HCI_VS_UPDATE_UART_HCI_BAUDRATE,
> > - sizeof(speed_le), &speed_le,
> > - HCI_INIT_TIMEOUT);
> > - if (!IS_ERR(skb)) {
> > - kfree_skb(skb);
> > - serdev_device_set_baudrate(serdev, speed);
> > - }
> > - }
> > -
> > err = download_firmware(lldev);
> > if (!err)
> > break;
> > @@ -677,7 +656,25 @@ static int ll_setup(struct hci_uart *hu)
> > }
> >
> > /* Operational speed if any */
> > + if (hu->oper_speed)
> > + speed = hu->oper_speed;
> > + else if (hu->proto->oper_speed)
> > + speed = hu->proto->oper_speed;
> > + else
> > + speed = 0;
> > +
> > + if (speed) {
> > + __le32 speed_le = cpu_to_le32(speed);
> > + struct sk_buff *skb;
> >
> > + skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE,
> > + sizeof(speed_le), &speed_le,
> > + HCI_INIT_TIMEOUT);
> > + if (!IS_ERR(skb)) {
> > + kfree_skb(skb);
> > + serdev_device_set_baudrate(serdev, speed);
> > + }
> > + }
> >
> > return 0;
> > }
> > --
> > 2.17.1
> >