[Patch 3/3] ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries

From: Benoit Parrot
Date: Wed Oct 16 2019 - 14:47:32 EST


Add VPFE device nodes entries.
Add OmniVision OV2659 sensor device nodes and linkage.

Since Rev1.2a on this board the sensor source clock (xvclk) has a
dedicated 12Mhz oscillator instead of using clkout1.
Add 'audio_mstrclk' fixed clock object to represent it.

Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
---
arch/arm/boot/dts/am43x-epos-evm.dts | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 95314121d111..1958d0985f76 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -145,6 +145,12 @@
system-clock-frequency = <12000000>;
};
};
+
+ audio_mstrclk: mclk_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
};

&am43xx_pinmux {
@@ -696,6 +702,21 @@
IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
};
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&audio_mstrclk>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe1_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
};

&i2c2 {
@@ -962,7 +983,7 @@

port {
vpfe1_ep: endpoint {
- /* remote-endpoint = <&sensor>; add once we have it */
+ remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
--
2.17.1