[PATCH 01/11] arm64: dts: qcom: db820c: Move non-soc entries out of /soc

[Bjorn Andersson]

The USB id pins and wlan regulator are not platform devices, so move
them out of /soc

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 58 ++++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index dba3488492f1..da2f01eb3be2 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -399,13 +399,6 @@
 			};
 		};
 
-		usb3_id: usb3-id {
-			compatible = "linux,extcon-usb-gpio";
-			id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb3_vbus_det_gpio>;
-		};
-
 		usb@76f8800 {
 			status = "okay";
 			extcon = <&usb2_id>;
@@ -417,28 +410,6 @@
 			};
 		};
 
-		usb2_id: usb2-id {
-			compatible = "linux,extcon-usb-gpio";
-			id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb2_vbus_det_gpio>;
-		};
-
-		wlan_en: wlan-en-1-8v {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_en_gpios>;
-			compatible = "regulator-fixed";
-			regulator-name = "wlan-en-regulator";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-
-			gpio = <&pm8994_gpios 8 0>;
-
-			/* WLAN card specific delay */
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
 		agnoc@0 {
 			pcie@600000 {
 				status = "okay";
@@ -667,6 +638,35 @@
 			};
 		};
 	};
+
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
+
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &spmi_bus {
-- 
2.23.0