[PATCH v2] [trivial] net: Fix misspellings of "configure" and "configuration"
From: Geert Uytterhoeven
Date: Thu Oct 24 2019 - 11:22:10 EST
Fix various misspellings of "configuration" and "configure".
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
- Merge
[trivial] net/mlx5e: Spelling s/configuraiton/configuration/
[trivial] qed: Spelling s/configuraiton/configuration/
- Fix typo in subject,
- Extend with various other similar misspellings.
---
drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_int.h | 4 ++--
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 2 +-
drivers/net/ethernet/qlogic/qede/qede_filter.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 2 +-
drivers/net/wireless/intel/iwlwifi/iwl-fh.h | 2 +-
drivers/net/wireless/ti/wlcore/spi.c | 2 +-
include/uapi/linux/dcbnl.h | 2 +-
8 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
index 633b117eb13e8143..7b672ada63a39733 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
@@ -175,7 +175,7 @@ static int update_xoff_threshold(struct mlx5e_port_buffer *port_buffer,
* @port_buffer: <output> port receive buffer configuration
* @change: <output>
*
- * Update buffer configuration based on pfc configuraiton and
+ * Update buffer configuration based on pfc configuration and
* priority to buffer mapping.
* Buffer's lossy bit is changed to:
* lossless if there is at least one PFC enabled priority
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h
index d473b522afc5137f..9ad568d93ae6501c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.h
@@ -37,14 +37,14 @@
#include <linux/slab.h>
#include "qed.h"
-/* Fields of IGU PF CONFIGRATION REGISTER */
+/* Fields of IGU PF CONFIGURATION REGISTER */
#define IGU_PF_CONF_FUNC_EN (0x1 << 0) /* function enable */
#define IGU_PF_CONF_MSI_MSIX_EN (0x1 << 1) /* MSI/MSIX enable */
#define IGU_PF_CONF_INT_LINE_EN (0x1 << 2) /* INT enable */
#define IGU_PF_CONF_ATTN_BIT_EN (0x1 << 3) /* attention enable */
#define IGU_PF_CONF_SINGLE_ISR_EN (0x1 << 4) /* single ISR mode enable */
#define IGU_PF_CONF_SIMD_MODE (0x1 << 5) /* simd all ones mode */
-/* Fields of IGU VF CONFIGRATION REGISTER */
+/* Fields of IGU VF CONFIGURATION REGISTER */
#define IGU_VF_CONF_FUNC_EN (0x1 << 0) /* function enable */
#define IGU_VF_CONF_MSI_MSIX_EN (0x1 << 1) /* MSI/MSIX enable */
#define IGU_VF_CONF_SINGLE_ISR_EN (0x1 << 4) /* single ISR mode enable */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.h b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
index 9a8fd79611f24909..368e88565783bb50 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
@@ -305,7 +305,7 @@ void qed_iov_bulletin_set_udp_ports(struct qed_hwfn *p_hwfn,
/**
* @brief Read sriov related information and allocated resources
- * reads from configuraiton space, shmem, etc.
+ * reads from configuration space, shmem, etc.
*
* @param p_hwfn
*
diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 9a6a9a008714659a..d6cfe4ffbaf3d883 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1298,7 +1298,7 @@ void qede_config_rx_mode(struct net_device *ndev)
rx_mode.type = QED_FILTER_TYPE_RX_MODE;
/* Remove all previous unicast secondary macs and multicast macs
- * (configrue / leave the primary mac)
+ * (configure / leave the primary mac)
*/
rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE,
edev->ndev->dev_addr);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 2fe12b0de5b4f2a4..42f00a2a8c8007d2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -1037,7 +1037,7 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
}
/*
- * Configire PCIE after Ini init. SERDES values now come from ini file
+ * Configure PCIE after Ini init. SERDES values now come from ini file
* This enables PCIe low power mode.
*/
array = power_off ? &ah->iniPcieSerdes :
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
index 0c12df5582409db3..05c1c77c88a0f738 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
@@ -148,7 +148,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans,
*
* Bits 3:0:
* Define the maximum number of pending read requests.
- * Maximum configration value allowed is 0xC
+ * Maximum configuration value allowed is 0xC
* Bits 9:8:
* Define the maximum transfer size. (64 / 128 / 256)
* Bit 10:
diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index d4c09e54fd634d61..18c4d998ce4b92e6 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -186,7 +186,7 @@ static void wl12xx_spi_init(struct device *child)
spi_sync(to_spi_device(glue->dev), &m);
- /* Restore chip select configration to normal */
+ /* Restore chip select configuration to normal */
spi->mode ^= SPI_CS_HIGH;
kfree(cmd);
}
diff --git a/include/uapi/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
index 69df19aa8e728909..a791a94013a69a61 100644
--- a/include/uapi/linux/dcbnl.h
+++ b/include/uapi/linux/dcbnl.h
@@ -286,7 +286,7 @@ struct dcbmsg {
* @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
* @DCB_CMD_SNUMTCS: set the number of traffic classes
* @DCB_CMD_GBCN: set backward congestion notification configuration
- * @DCB_CMD_SBCN: get backward congestion notification configration.
+ * @DCB_CMD_SBCN: get backward congestion notification configuration.
* @DCB_CMD_GAPP: get application protocol configuration
* @DCB_CMD_SAPP: set application protocol configuration
* @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
--
2.17.1