[PATCH v2 2/5] dt-bindings: i2c: at91: document optional bus recovery properties

[Kamel Bouhara]

The at91 I2C controller can support bus recovery by re-assigning SCL
and SDA to gpios. Add the optional pinctrl and gpio properties to do
so.

Signed-off-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/i2c/i2c-at91.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index b7cec17c3daf..8ea2ce5d8610 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -19,8 +19,13 @@ Optional properties:
   capable I2C controllers.
 - i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c"
   and "atmel,sama5d2-i2c".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+  bus recovery, call it "gpio" state
 - Child nodes conforming to i2c bus binding
 
+
 Examples :
 
 i2c0: i2c@fff84000 {
@@ -55,6 +60,11 @@ i2c0: i2c@f8034600 {
 	clocks = <&flx0>;
 	atmel,fifo-size = <16>;
 	i2c-sda-hold-time-ns = <336>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";
-- 
2.23.0