[PATCH v5 3/3] dmaengine: ti: edma: Add support for handling reserved channels

From: Peter Ujfalusi
Date: Fri Oct 25 2019 - 03:30:11 EST


Like paRAM slots, channels could be used by other cores and in this case
we need to make sure that the driver do not alter these channels.

Handle the generic dma-channel-mask property to mark channels in a bitmap
which can not be used by Linux and convert the legacy rsv_chans if it is
provided by platform_data.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
drivers/dma/ti/edma.c | 59 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 53 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 54fd981e3db5..0ecfc2e1d798 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -260,6 +260,13 @@ struct edma_cc {
*/
unsigned long *slot_inuse;

+ /*
+ * For tracking reserved channels used by DSP.
+ * If the bit is cleared, the channel is allocated to be used by DSP
+ * and Linux must not touch it.
+ */
+ unsigned long *channels_mask;
+
struct dma_device dma_slave;
struct dma_device *dma_memcpy;
struct edma_chan *slave_chans;
@@ -716,6 +723,12 @@ static int edma_alloc_channel(struct edma_chan *echan,
struct edma_cc *ecc = echan->ecc;
int channel = EDMA_CHAN_SLOT(echan->ch_num);

+ if (!test_bit(echan->ch_num, ecc->channels_mask)) {
+ dev_err(ecc->dev, "Channel%d is reserved, can not be used!\n",
+ echan->ch_num);
+ return -EINVAL;
+ }
+
/* ensure access through shadow region 0 */
edma_or_array2(ecc, EDMA_DRAE, 0, EDMA_REG_ARRAY_INDEX(channel),
EDMA_CHANNEL_BIT(channel));
@@ -2249,7 +2262,7 @@ static int edma_probe(struct platform_device *pdev)
{
struct edma_soc_info *info = pdev->dev.platform_data;
s8 (*queue_priority_mapping)[2];
- const s16 (*rsv_slots)[2];
+ const s16 (*reserved)[2];
int i, irq;
char *irq_name;
struct resource *mem;
@@ -2329,15 +2342,32 @@ static int edma_probe(struct platform_device *pdev)
if (!ecc->slot_inuse)
return -ENOMEM;

+ ecc->channels_mask = devm_kcalloc(dev,
+ BITS_TO_LONGS(ecc->num_channels),
+ sizeof(unsigned long), GFP_KERNEL);
+ if (!ecc->channels_mask)
+ return -ENOMEM;
+
+ /* Mark all channels available initially */
+ bitmap_fill(ecc->channels_mask, ecc->num_channels);
+
ecc->default_queue = info->default_queue;

if (info->rsv) {
/* Set the reserved slots in inuse list */
- rsv_slots = info->rsv->rsv_slots;
- if (rsv_slots) {
- for (i = 0; rsv_slots[i][0] != -1; i++)
- bitmap_set(ecc->slot_inuse, rsv_slots[i][0],
- rsv_slots[i][1]);
+ reserved = info->rsv->rsv_slots;
+ if (reserved) {
+ for (i = 0; reserved[i][0] != -1; i++)
+ bitmap_set(ecc->slot_inuse, reserved[i][0],
+ reserved[i][1]);
+ }
+
+ /* Clear channels not usable for Linux */
+ reserved = info->rsv->rsv_chans;
+ if (reserved) {
+ for (i = 0; reserved[i][0] != -1; i++)
+ bitmap_clear(ecc->channels_mask, reserved[i][0],
+ reserved[i][1]);
}
}

@@ -2389,6 +2419,7 @@ static int edma_probe(struct platform_device *pdev)

if (!ecc->legacy_mode) {
int lowest_priority = 0;
+ unsigned int array_max;
struct of_phandle_args tc_args;

ecc->tc_list = devm_kcalloc(dev, ecc->num_tc,
@@ -2410,6 +2441,18 @@ static int edma_probe(struct platform_device *pdev)
info->default_queue = i;
}
}
+
+ /* See if we have optional dma-channel-mask array */
+ array_max = DIV_ROUND_UP(ecc->num_channels, BITS_PER_TYPE(u32));
+ ret = of_property_read_variable_u32_array(node,
+ "dma-channel-mask",
+ (u32 *)ecc->channels_mask,
+ 1, array_max);
+ if (ret > 0 && ret != array_max)
+ dev_warn(dev, "dma-channel-mask is not complete.\n");
+ else if (ret == -EOVERFLOW || ret == -ENODATA)
+ dev_warn(dev,
+ "dma-channel-mask is out of range or empty\n");
}

/* Event queue priority mapping */
@@ -2427,6 +2470,10 @@ static int edma_probe(struct platform_device *pdev)
edma_dma_init(ecc, legacy_mode);

for (i = 0; i < ecc->num_channels; i++) {
+ /* Do not touch reserved channels */
+ if (!test_bit(i, ecc->channels_mask))
+ continue;
+
/* Assign all channels to the default queue */
edma_assign_channel_eventq(&ecc->slave_chans[i],
info->default_queue);
--
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki