[PATCH v7 10/19] PM / devfreq: tegra30: Don't enable consecutive-down interrupt on startup

[Dmitry Osipenko]

The consecutive-down event tells that we should perform frequency
de-boosting, but boosting is in a reset state on start and hence the
event won't do anything useful for us and it will be just a dummy
interrupt request.

Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/devfreq/tegra30-devfreq.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index fb1163aaaae7..e9cb0ea54ee7 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -490,7 +490,6 @@ static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
 		<< ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_NUM_SHIFT;
 	val |= ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN;
 	val |= ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN;
-	val |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
 	val |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
 	val |= ACTMON_DEV_CTRL_ENB;
 
-- 
2.23.0