Re: [PATCH v2 11/11] ARM: dts: imx6ul-kontron-n6310-s-43: Add missing includes for GPIOs and IRQs

[Krzysztof Kozlowski]

On Tue, Oct 29, 2019 at 11:28:16AM +0000, Schrempf Frieder wrote:
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> 
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
> ---
>  arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
> index 5bad29683cc3..295bc3138fea 100644
> --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
> +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
> @@ -7,6 +7,9 @@
>  
>  #include "imx6ul-kontron-n6310-s.dts"
>  
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>

This is not needed. This includes imx6ul-kontron-n6310-s.dts, which
includes imx6ul-kontron-n6310-som.dtsi which has proper GPIO include. It
also polls imx6ul.dtsi which has the IRQ defines.

My comment from v1 was for a case where you have a DTSI standing on its
own. If it does not include anything else, then it should have all
necessary inclusions (not only GPIO but also iMX-specific pinctrl and clock).

Best regards,
Krzysztof


> +
>  / {
>  	model = "Kontron N6310 S 43";
>  	compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s",
> -- 
> 2.17.1