Re: [RFC PATCH 3/3] net: phy: at803x: add device tree binding

From: Michael Walle
Date: Thu Oct 31 2019 - 13:22:59 EST


Am 2019-10-31 00:59, schrieb Michael Walle:
+
+ if (of_property_read_bool(node, "atheros,keep-pll-enabled"))
+ priv->flags |= AT803X_KEEP_PLL_ENABLED;

This should probably be a PHY tunable rather than a Device Tree
property
as this delves more into the policy than the pure hardware description.

To be frank. I'll first need to look into PHY tunables before answering ;)
But keep in mind that this clock output might be used anywhere on the
board. It must not have something to do with networking. The PHY has a
crystal and it can generate these couple of frequencies regardless of
its network operation.

Although it could be used to provide any clock on the board, I don't know
if that is possible at the moment, because the PHY is configured in
config_init() which is only called when someone brings the interface up,
correct?

Anyway, I don't know if that is worth the hassle because in almost all
cases the use case is to provide a fixed clock to the MAC for an RGMII
interface. I don't know if that really fits a PHY tunable, because in
the worst case the link won't work at all if the SoC expects an
always-on clock.

--
-michael