[PATCH v3 00/36] QUICC Engine support on ARM

[Rasmus Villemoes]

There have been several attempts in the past few years to allow
building the QUICC engine drivers for platforms other than PPC. This
is yet another attempt.

Changes in v3:

- Address the performance impact on ppc from replacing out_be32 by
  iowrite32be by instead introducing a qe_iowrite32be wrapper and
  using that - patches 3 and 4 in this series.

- Extend the series so that both the QE core as well as ucc_uart
  builds for ARM - patches 26-33.

- Reorganize things a bit to avoid touching code that gets killed
  anyway in a later patch.

Also the patches are now better grouped:

1-5 are about replacing in_be32 etc. in the core QE code (drivers/soc/fsl/qe).

6-8 handle miscellaneous other ppcisms.

9-21 deal with qe_ic: Simplifying the driver significantly by removing
unused code, and removing the platform-specific initialization from
arch/powerpc/.

22-25 deal with raw access to devicetree properties in native endianness.

26-33 makes drivers/tty/serial/ucc_uart.c (CONFIG_SERIAL_QE) ready to build on arm.

34-36 remove the PPC32 dependency from QUICC_ENGINE. Two drivers that
depend on QUICC_ENGINE get an explicit PPC32 dependency to prevent
allmodconfig build failures.

The series has been built and booted on both an mpc8309-based platform
(ppc) as well as an ls1021a-based platform (arm). The core QE code is
exercised on both, while I could only test the ucc_uart on arm, since
the uarts are not wired up on our mpc8309 board.

Rasmus Villemoes (36):
  soc: fsl: qe: remove space-before-tab
  soc: fsl: qe: drop volatile qualifier of struct qe_ic::regs
  soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers
  soc: fsl: qe: introduce qe_io{read,write}* wrappers
  soc: fsl: qe: avoid ppc-specific io accessors
  soc: fsl: qe: replace spin_event_timeout by readx_poll_timeout_atomic
  soc: fsl: qe: qe.c: guard use of pvr_version_is() with CONFIG_PPC32
  soc: fsl: qe: drop unneeded #includes
  soc: fsl: qe: drop assign-only high_active in qe_ic_init
  soc: fsl: qe: remove pointless sysfs registration in qe_ic.c
  soc: fsl: qe: use qe_ic_cascade_{low,high}_mpic also on 83xx
  soc: fsl: qe: move calls of qe_ic_init out of arch/powerpc/
  powerpc/83xx: remove mpc83xx_ipic_and_qe_init_IRQ
  powerpc/85xx: remove mostly pointless mpc85xx_qe_init()
  soc: fsl: qe: move qe_ic_cascade_* functions to qe_ic.c
  soc: fsl: qe: rename qe_ic_cascade_low_mpic -> qe_ic_cascade_low
  soc: fsl: qe: remove unused qe_ic_set_* functions
  soc: fsl: qe: don't use NO_IRQ in qe_ic.c
  soc: fsl: qe: make qe_ic_get_{low,high}_irq static
  soc: fsl: qe: simplify qe_ic_init()
  soc: fsl: qe: merge qe_ic.h headers into qe_ic.c
  soc: fsl: qe: qe.c: use of_property_read_* helpers
  soc: fsl: qe: qe_io.c: don't open-code of_parse_phandle()
  soc: fsl: qe: qe_io.c: access device tree property using be32_to_cpu
  soc: fsl: qe: qe_io.c: use of_property_read_u32() in par_io_init()
  soc: fsl: move cpm.h from powerpc/include/asm to include/soc/fsl
  soc/fsl/qe/qe.h: update include path for cpm.h
  serial: ucc_uart: explicitly include soc/fsl/cpm.h
  serial: ucc_uart: replace ppc-specific IO accessors
  serial: ucc_uart: factor out soft_uart initialization
  serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
  serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  serial: ucc_uart: access __be32 field using be32_to_cpu
  net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32
  net/wan: make FSL_UCC_HDLC explicitly depend on PPC32
  soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE

 arch/powerpc/include/asm/cpm.h                | 172 +-------
 arch/powerpc/platforms/83xx/km83xx.c          |   3 +-
 arch/powerpc/platforms/83xx/misc.c            |  23 --
 arch/powerpc/platforms/83xx/mpc832x_mds.c     |   3 +-
 arch/powerpc/platforms/83xx/mpc832x_rdb.c     |   3 +-
 arch/powerpc/platforms/83xx/mpc836x_mds.c     |   3 +-
 arch/powerpc/platforms/83xx/mpc836x_rdk.c     |   3 +-
 arch/powerpc/platforms/83xx/mpc83xx.h         |   7 -
 arch/powerpc/platforms/85xx/common.c          |  23 --
 arch/powerpc/platforms/85xx/corenet_generic.c |  12 -
 arch/powerpc/platforms/85xx/mpc85xx.h         |   2 -
 arch/powerpc/platforms/85xx/mpc85xx_mds.c     |  28 --
 arch/powerpc/platforms/85xx/mpc85xx_rdb.c     |  18 -
 arch/powerpc/platforms/85xx/twr_p102x.c       |  16 -
 drivers/net/ethernet/freescale/Kconfig        |   2 +-
 drivers/net/wan/Kconfig                       |   2 +-
 drivers/net/wan/fsl_ucc_hdlc.c                |   4 +-
 drivers/soc/fsl/qe/Kconfig                    |   2 +-
 drivers/soc/fsl/qe/gpio.c                     |  34 +-
 drivers/soc/fsl/qe/qe.c                       |  95 ++---
 drivers/soc/fsl/qe/qe_ic.c                    | 285 ++++++-------
 drivers/soc/fsl/qe/qe_ic.h                    |  99 -----
 drivers/soc/fsl/qe/qe_io.c                    |  70 ++--
 drivers/soc/fsl/qe/qe_tdm.c                   |   8 +-
 drivers/soc/fsl/qe/ucc.c                      |  26 +-
 drivers/soc/fsl/qe/ucc_fast.c                 |  71 ++--
 drivers/soc/fsl/qe/ucc_slow.c                 |  38 +-
 drivers/soc/fsl/qe/usb.c                      |   2 +-
 drivers/tty/serial/ucc_uart.c                 | 383 +++++++++---------
 include/soc/fsl/cpm.h                         | 171 ++++++++
 include/soc/fsl/qe/qe.h                       |  42 +-
 include/soc/fsl/qe/qe_ic.h                    | 135 ------
 32 files changed, 701 insertions(+), 1084 deletions(-)
 delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
 create mode 100644 include/soc/fsl/cpm.h
 delete mode 100644 include/soc/fsl/qe/qe_ic.h

-- 
2.23.0