Re: [PATCHv2 1/8] ftrace: add ftrace_init_nop()

[Steven Rostedt]

On Tue, 29 Oct 2019 16:58:25 +0000
Mark Rutland <mark.rutland@xxxxxxx> wrote:

> Architectures may need to perform special initialization of ftrace
> callsites, and today they do so by special-casing ftrace_make_nop() when
> the expected branch address is MCOUNT_ADDR. In some cases (e.g. for
> patchable-function-entry), we don't have an mcount-like symbol and don't
> want a synthetic MCOUNT_ADDR, but we may need to perform some
> initialization of callsites.
> 
> To make it possible to separate initialization from runtime
> modification, and to handle cases without an mcount-like symbol, this
> patch adds an optional ftrace_init_nop() function that architectures can
> implement, which does not pass a branch address.
> 
> Where an architecture does not provide ftrace_init_nop(), we will fall
> back to the existing behaviour of calling ftrace_make_nop() with
> MCOUNT_ADDR.
> 
> At the same time, ftrace_code_disable() is renamed to
> ftrace_nop_initialize() to make it clearer that it is intended to
> intialize a callsite into a disabled state, and is not for disabling a
> callsite that has been runtime enabled. The kerneldoc description of rec
> arguments is updated to cover non-mcount callsites.
> 
> Signed-off-by: Mark Rutland <mark.rutland@xxxxxxx>
> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>

Reviewed-by: Steven Rostedt (VMware) <rostedt@xxxxxxxxxxx>

-- Steve

> Cc: Torsten Duwe <duwe@xxxxxxx>
> ---
>  include/linux/ftrace.h | 35 ++++++++++++++++++++++++++++++++---
>  kernel/trace/ftrace.c  |  6 +++---
>  2 files changed, 35 insertions(+), 6 deletions(-)
> 
> diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
> index 8a8cb3c401b2..9867d90d635e 100644
> --- a/include/linux/ftrace.h
> +++ b/include/linux/ftrace.h
> @@ -499,7 +499,7 @@ static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
>  /**
>   * ftrace_make_nop - convert code into nop
>   * @mod: module structure if called by module load initialization
> - * @rec: the mcount call site record
> + * @rec: the call site record (e.g. mcount/fentry)
>   * @addr: the address that the call site should be calling
>   *
>   * This is a very sensitive operation and great care needs
> @@ -520,9 +520,38 @@ static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
>  extern int ftrace_make_nop(struct module *mod,
>  			   struct dyn_ftrace *rec, unsigned long addr);
>  
> +
> +/**
> + * ftrace_init_nop - initialize a nop call site
> + * @mod: module structure if called by module load initialization
> + * @rec: the call site record (e.g. mcount/fentry)
> + *
> + * This is a very sensitive operation and great care needs
> + * to be taken by the arch.  The operation should carefully
> + * read the location, check to see if what is read is indeed
> + * what we expect it to be, and then on success of the compare,
> + * it should write to the location.
> + *
> + * The code segment at @rec->ip should contain the contents created by
> + * the compiler
> + *
> + * Return must be:
> + *  0 on success
> + *  -EFAULT on error reading the location
> + *  -EINVAL on a failed compare of the contents
> + *  -EPERM  on error writing to the location
> + * Any other value will be considered a failure.
> + */
> +#ifndef ftrace_init_nop
> +static inline int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
> +{
> +	return ftrace_make_nop(mod, rec, MCOUNT_ADDR);
> +}
> +#endif
> +
>  /**
>   * ftrace_make_call - convert a nop call site into a call to addr
> - * @rec: the mcount call site record
> + * @rec: the call site record (e.g. mcount/fentry)
>   * @addr: the address that the call site should call
>   *
>   * This is a very sensitive operation and great care needs
> @@ -545,7 +574,7 @@ extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
>  #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
>  /**
>   * ftrace_modify_call - convert from one addr to another (no nop)
> - * @rec: the mcount call site record
> + * @rec: the call site record (e.g. mcount/fentry)
>   * @old_addr: the address expected to be currently called to
>   * @addr: the address to change to
>   *
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index f296d89be757..5259d4dea675 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -2494,14 +2494,14 @@ struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter)
>  }
>  
>  static int
> -ftrace_code_disable(struct module *mod, struct dyn_ftrace *rec)
> +ftrace_nop_initialize(struct module *mod, struct dyn_ftrace *rec)
>  {
>  	int ret;
>  
>  	if (unlikely(ftrace_disabled))
>  		return 0;
>  
> -	ret = ftrace_make_nop(mod, rec, MCOUNT_ADDR);
> +	ret = ftrace_init_nop(mod, rec);
>  	if (ret) {
>  		ftrace_bug_type = FTRACE_BUG_INIT;
>  		ftrace_bug(ret, rec);
> @@ -2943,7 +2943,7 @@ static int ftrace_update_code(struct module *mod, struct ftrace_page *new_pgs)
>  			 * to the NOP instructions.
>  			 */
>  			if (!__is_defined(CC_USING_NOP_MCOUNT) &&
> -			    !ftrace_code_disable(mod, p))
> +			    !ftrace_nop_initialize(mod, p))
>  				break;
>  
>  			update_cnt++;