[PATCH 5.3 048/163] serial: 8250_omap: Fix gpio check for auto RTS/CTS

[Greg Kroah-Hartman]

From: Adam Ford <aford173@xxxxxxxxx>

[ Upstream commit fc64f7abbef2dae7ee4c94702fb3cf9a2be5431a ]

There are two checks to see if the manual gpio is configured, but
these the check is seeing if the structure is NULL instead it
should check to see if there are CTS and/or RTS pins defined.

This patch uses checks for those individual pins instead of
checking for the structure itself to restore auto RTS/CTS.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Reviewed-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20191006163314.23191-2-aford173@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_omap.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 3ef65cbd2478a..e4b08077f8757 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -141,7 +141,7 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 	serial8250_do_set_mctrl(port, mctrl);
 
-	if (!up->gpios) {
+	if (!mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS)) {
 		/*
 		 * Turn off autoRTS if RTS is lowered and restore autoRTS
 		 * setting if RTS is raised
@@ -456,7 +456,8 @@ static void omap_8250_set_termios(struct uart_port *port,
 	up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
 
 	if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW &&
-	    !up->gpios) {
+	    !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS) &&
+	    !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_CTS)) {
 		/* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
 		up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
 		priv->efr |= UART_EFR_CTS;
-- 
2.20.1