[PATCH 2/2] net: phy: dp83869: Add TI dp83869 phy
From: Dan Murphy
Date: Tue Nov 05 2019 - 13:19:40 EST
Add support for the TI DP83869 Gigabit ethernet phy
device.
The DP83869 is a robust, low power, fully featured
Physical Layer transceiver with integrated PMD
sublayers to support 10BASE-T, 100BASE-TX and
1000BASE-T Ethernet protocols.
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83869.c | 439 +++++++++++++++++++++++++++
include/dt-bindings/net/ti-dp83869.h | 43 +++
4 files changed, 489 insertions(+)
create mode 100644 drivers/net/phy/dp83869.c
create mode 100644 include/dt-bindings/net/ti-dp83869.h
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index fe602648b99f..4f8db1bb72a8 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -364,6 +364,12 @@ config DP83867_PHY
---help---
Currently supports the DP83867 PHY.
+config DP83869_PHY
+ tristate "Texas Instruments DP83869 Gigabit PHY"
+ ---help---
+ Currently supports the DP83869 PHY. This PHY supports copper and
+ fiber connections.
+
config FIXED_PHY
tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index a03437e091f3..b433ec3bf9a6 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_DP83822_PHY) += dp83822.o
obj-$(CONFIG_DP83TC811_PHY) += dp83tc811.o
obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
+obj-$(CONFIG_DP83869_PHY) += dp83869.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
new file mode 100644
index 000000000000..eecc9b3129ca
--- /dev/null
+++ b/drivers/net/phy/dp83869.c
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for the Texas Instruments DP83869 PHY
+ * Copyright (C) 2019 Texas Instruments Inc.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+
+#include <dt-bindings/net/ti-dp83869.h>
+
+#define DP83869_PHY_ID 0x2000a0f1
+#define DP83869_DEVADDR 0x1f
+
+#define MII_DP83869_CFG1 0x09
+#define MII_DP83869_PHYCTRL 0x10
+#define MII_DP83869_MICR 0x12
+#define MII_DP83869_ISR 0x13
+#define DP83869_CTRL 0x1f
+#define DP83869_CFG4 0x1e
+
+/* Extended Registers */
+#define DP83869_GEN_CFG3 0x0031
+#define DP83869_RGMIICTL 0x0032
+#define DP83869_STRAP_STS1 0x006e
+#define DP83869_RGMIIDCTL 0x0086
+#define DP83869_IO_MUX_CFG 0x0170
+#define DP83869_OP_MODE 0x01df
+#define DP83869_FX_CTRL 0x0c00
+
+#define DP83869_SW_RESET BIT(15)
+#define DP83869_SW_RESTART BIT(14)
+
+/* MICR Interrupt bits */
+#define MII_DP83869_MICR_AN_ERR_INT_EN BIT(15)
+#define MII_DP83869_MICR_SPEED_CHNG_INT_EN BIT(14)
+#define MII_DP83869_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
+#define MII_DP83869_MICR_PAGE_RXD_INT_EN BIT(12)
+#define MII_DP83869_MICR_AUTONEG_COMP_INT_EN BIT(11)
+#define MII_DP83869_MICR_LINK_STS_CHNG_INT_EN BIT(10)
+#define MII_DP83869_MICR_FALSE_CARRIER_INT_EN BIT(8)
+#define MII_DP83869_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
+#define MII_DP83869_MICR_WOL_INT_EN BIT(3)
+#define MII_DP83869_MICR_XGMII_ERR_INT_EN BIT(2)
+#define MII_DP83869_MICR_POL_CHNG_INT_EN BIT(1)
+#define MII_DP83869_MICR_JABBER_INT_EN BIT(0)
+
+#define MII_DP83869_BMCR_DEFAULT (BMCR_ANENABLE | \
+ BMCR_FULLDPLX | \
+ BMCR_SPEED1000)
+
+/* This is the same bit mask as the BMCR so re-use the BMCR default */
+#define DP83869_FX_CTRL_DEFAULT MII_DP83869_BMCR_DEFAULT
+
+/* CFG1 bits */
+#define DP83869_1000BT_HALF_DUP BIT(8)
+#define DP83869_1000BT_FULL_DUP BIT(9)
+#define DP83869_MAN_CFG_MASTER_SLAVE BIT(10)
+
+#define DP83869_CFG1_DEFAULT (DP83869_1000BT_HALF_DUP | \
+ DP83869_1000BT_HALF_DUP | \
+ DP83869_MAN_CFG_MASTER_SLAVE)
+
+/* RGMIICTL bits */
+#define DP83869_RGMII_TX_CLK_DELAY_EN BIT(1)
+#define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0)
+
+/* STRAP_STS1 bits */
+#define DP83869_STRAP_STS1_RESERVED BIT(11)
+
+/* PHY CTRL bits */
+/* PHYCTRL bits */
+#define DP83869_RX_FIFO_SHIFT 12
+#define DP83869_TX_FIFO_SHIFT 14
+
+/* PHY_CTRL lower bytes 0x48 are declared as reserved */
+#define DP83869_PHY_CTRL_DEFAULT 0x48
+#define DP83869_PHYCR_FIFO_DEPTH_MASK GENMASK(15, 12)
+#define DP83869_PHYCR_RESERVED_MASK BIT(11)
+
+/* RGMIIDCTL bits */
+#define DP83869_RGMII_TX_CLK_DELAY_SHIFT 4
+
+/* IO_MUX_CFG bits */
+#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f
+
+#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
+#define DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
+#define DP83869_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
+#define DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
+
+/* CFG3 bits */
+#define DP83869_CFG3_PORT_MIRROR_EN BIT(0)
+
+/* OP MODE */
+#define DP83869_OP_MODE_MII BIT(5)
+#define DP83869_SGMII_RGMII_BRIDGE BIT(6)
+
+enum {
+ DP83869_PORT_MIRROING_KEEP,
+ DP83869_PORT_MIRROING_EN,
+ DP83869_PORT_MIRROING_DIS,
+};
+
+struct dp83869_private {
+ int tx_fifo_depth;
+ int rx_fifo_depth;
+ int io_impedance;
+ int port_mirroring;
+ bool rxctrl_strap_quirk;
+ int clk_output_sel;
+ int mode;
+};
+
+static int op_mode;
+
+module_param(op_mode, int, 0644);
+MODULE_PARM_DESC(op_mode, "The operational mode of the PHY");
+
+static int dp83869_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_DP83869_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83869_config_intr(struct phy_device *phydev)
+{
+ int micr_status;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ micr_status = phy_read(phydev, MII_DP83869_MICR);
+ if (micr_status < 0)
+ return micr_status;
+
+ micr_status |=
+ (MII_DP83869_MICR_AN_ERR_INT_EN |
+ MII_DP83869_MICR_SPEED_CHNG_INT_EN |
+ MII_DP83869_MICR_AUTONEG_COMP_INT_EN |
+ MII_DP83869_MICR_LINK_STS_CHNG_INT_EN |
+ MII_DP83869_MICR_DUP_MODE_CHNG_INT_EN |
+ MII_DP83869_MICR_SLEEP_MODE_CHNG_INT_EN);
+
+ return phy_write(phydev, MII_DP83869_MICR, micr_status);
+ }
+
+ micr_status = 0x0;
+ return phy_write(phydev, MII_DP83869_MICR, micr_status);
+}
+
+static int dp83869_config_port_mirroring(struct phy_device *phydev)
+{
+ struct dp83869_private *dp83869 =
+ (struct dp83869_private *)phydev->priv;
+
+ if (dp83869->port_mirroring == DP83869_PORT_MIRROING_EN)
+ phy_set_bits_mmd(phydev, DP83869_DEVADDR, DP83869_GEN_CFG3,
+ DP83869_CFG3_PORT_MIRROR_EN);
+ else
+ phy_clear_bits_mmd(phydev, DP83869_DEVADDR, DP83869_GEN_CFG3,
+ DP83869_CFG3_PORT_MIRROR_EN);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF_MDIO
+static int dp83869_of_init(struct phy_device *phydev)
+{
+ struct dp83869_private *dp83869 = phydev->priv;
+ struct device *dev = &phydev->mdio.dev;
+ struct device_node *of_node = dev->of_node;
+ int ret;
+
+ if (!of_node)
+ return -ENODEV;
+
+ dp83869->io_impedance = -EINVAL;
+
+ /* Optional configuration */
+ ret = of_property_read_u32(of_node, "ti,clk-output-sel",
+ &dp83869->clk_output_sel);
+ if (ret || dp83869->clk_output_sel > DP83869_CLK_O_SEL_REF_CLK)
+ dp83869->clk_output_sel = DP83869_CLK_O_SEL_REF_CLK;
+
+ ret = of_property_read_u32(of_node, "ti,op-mode", &dp83869->mode);
+ if (ret == 0) {
+ if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET ||
+ dp83869->mode > DP83869_SGMII_COPPER_ETHERNET)
+ return -EINVAL;
+ }
+
+ op_mode = dp83869->mode;
+
+ if (of_property_read_bool(of_node, "ti,max-output-impedance"))
+ dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MAX;
+ else if (of_property_read_bool(of_node, "ti,min-output-impedance"))
+ dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN;
+
+ if (of_property_read_bool(of_node, "enet-phy-lane-swap"))
+ dp83869->port_mirroring = DP83869_PORT_MIRROING_EN;
+ else
+ dp83869->port_mirroring = DP83869_PORT_MIRROING_DIS;
+
+ if (of_property_read_u32(of_node, "rx-fifo-depth",
+ &dp83869->rx_fifo_depth))
+ dp83869->rx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
+
+ if (of_property_read_u32(of_node, "tx-fifo-depth",
+ &dp83869->tx_fifo_depth))
+ dp83869->tx_fifo_depth = DP83869_PHYCR_FIFO_DEPTH_4_B_NIB;
+
+ return 0;
+}
+#else
+static int dp83869_of_init(struct phy_device *phydev)
+{
+ return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int dp83869_configure_rgmii(struct phy_device *phydev,
+ struct dp83869_private *dp83869)
+{
+ int ret, val;
+
+ if (phy_interface_is_rgmii(phydev)) {
+ val = phy_read(phydev, MII_DP83869_PHYCTRL);
+ if (val < 0)
+ return val;
+ val &= ~DP83869_PHYCR_FIFO_DEPTH_MASK;
+ val |= (dp83869->tx_fifo_depth << DP83869_TX_FIFO_SHIFT);
+ val |= (dp83869->rx_fifo_depth << DP83869_RX_FIFO_SHIFT);
+
+ ret = phy_write(phydev, MII_DP83869_PHYCTRL, val);
+ if (ret)
+ return ret;
+ val = phy_read(phydev, MII_DP83869_PHYCTRL);
+ }
+
+ if (dp83869->io_impedance >= 0)
+ phy_modify_mmd(phydev, DP83869_DEVADDR,
+ DP83869_IO_MUX_CFG,
+ DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
+ dp83869->io_impedance &
+ DP83869_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
+
+ return ret;
+}
+
+static int dp83869_configure_mode(struct phy_device *phydev,
+ struct dp83869_private *dp83869)
+{
+ int phy_ctrl_val;
+ int ret;
+
+ if (op_mode < DP83869_RGMII_COPPER_ETHERNET ||
+ op_mode > DP83869_SGMII_COPPER_ETHERNET)
+ return -EINVAL;
+
+ if (dp83869->mode != op_mode)
+ dp83869->mode = op_mode;
+
+ /* Below init sequence for each operational mode is defined in
+ * section 9.4.8 of the datasheet.
+ */
+ ret = phy_write_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE,
+ dp83869->mode);
+ if (ret)
+ return ret;
+
+ ret = phy_write(phydev, MII_BMCR, MII_DP83869_BMCR_DEFAULT);
+ if (ret)
+ return ret;
+
+ phy_ctrl_val = (dp83869->rx_fifo_depth << DP83869_RX_FIFO_SHIFT |
+ dp83869->tx_fifo_depth << DP83869_TX_FIFO_SHIFT |
+ DP83869_PHY_CTRL_DEFAULT);
+
+ switch (dp83869->mode) {
+ case DP83869_RGMII_COPPER_ETHERNET:
+ ret = phy_write(phydev, MII_DP83869_PHYCTRL,
+ phy_ctrl_val);
+ if (ret)
+ return ret;
+
+ ret = phy_write(phydev, MII_DP83869_CFG1, DP83869_CFG1_DEFAULT);
+ if (ret)
+ return ret;
+
+ ret = dp83869_configure_rgmii(phydev, dp83869);
+ if (ret)
+ return ret;
+ break;
+ case DP83869_RGMII_SGMII_BRIDGE:
+ phy_modify_mmd(phydev, DP83869_DEVADDR, DP83869_OP_MODE,
+ DP83869_SGMII_RGMII_BRIDGE,
+ DP83869_SGMII_RGMII_BRIDGE);
+
+ ret = phy_write_mmd(phydev, DP83869_DEVADDR,
+ DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
+ if (ret)
+ return ret;
+
+ break;
+ case DP83869_1000M_MEDIA_CONVERT:
+ ret = phy_write(phydev, MII_DP83869_PHYCTRL,
+ phy_ctrl_val);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, DP83869_DEVADDR,
+ DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
+ if (ret)
+ return ret;
+ break;
+ case DP83869_100M_MEDIA_CONVERT:
+ ret = phy_write(phydev, MII_DP83869_PHYCTRL,
+ phy_ctrl_val);
+ if (ret)
+ return ret;
+ break;
+ case DP83869_SGMII_COPPER_ETHERNET:
+ ret = phy_write(phydev, MII_DP83869_PHYCTRL,
+ phy_ctrl_val);
+ if (ret)
+ return ret;
+
+ ret = phy_write(phydev, MII_DP83869_CFG1, DP83869_CFG1_DEFAULT);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, DP83869_DEVADDR,
+ DP83869_FX_CTRL, DP83869_FX_CTRL_DEFAULT);
+ if (ret)
+ return ret;
+
+ break;
+ case DP83869_RGMII_1000_BASE:
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ return 0;
+}
+
+static int dp83869_config_init(struct phy_device *phydev)
+{
+ struct dp83869_private *dp83869;
+ int ret, val;
+
+ if (!phydev->priv) {
+ dp83869 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83869),
+ GFP_KERNEL);
+ if (!dp83869)
+ return -ENOMEM;
+
+ phydev->priv = dp83869;
+ ret = dp83869_of_init(phydev);
+ if (ret)
+ return ret;
+ } else {
+ dp83869 = (struct dp83869_private *)phydev->priv;
+ }
+
+ ret = dp83869_configure_mode(phydev, dp83869);
+ if (ret)
+ return ret;
+
+ /* Enable Interrupt output INT_OE in CFG4 register */
+ if (phy_interrupt_is_valid(phydev)) {
+ val = phy_read(phydev, DP83869_CFG4);
+ val |= BIT(7);
+ phy_write(phydev, DP83869_CFG4, val);
+ }
+
+ if (dp83869->port_mirroring != DP83869_PORT_MIRROING_KEEP)
+ dp83869_config_port_mirroring(phydev);
+
+ /* Clock output selection if muxing property is set */
+ if (dp83869->clk_output_sel != DP83869_CLK_O_SEL_REF_CLK)
+ phy_modify_mmd(phydev, DP83869_DEVADDR, DP83869_IO_MUX_CFG,
+ DP83869_IO_MUX_CFG_CLK_O_SEL_MASK,
+ dp83869->clk_output_sel <<
+ DP83869_IO_MUX_CFG_CLK_O_SEL_SHIFT);
+
+ return 0;
+}
+
+static int dp83869_phy_reset(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, DP83869_CTRL, DP83869_SW_RESET);
+ if (err < 0)
+ return err;
+
+ usleep_range(10, 20);
+
+ return dp83869_config_init(phydev);
+}
+
+static struct phy_driver dp83869_driver[] = {
+ {
+ .phy_id = DP83869_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83869",
+ .features = PHY_GBIT_FIBRE_FEATURES,
+
+ .config_init = dp83869_config_init,
+ .soft_reset = dp83869_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = dp83869_ack_interrupt,
+ .config_intr = dp83869_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ },
+};
+module_phy_driver(dp83869_driver);
+
+static struct mdio_device_id __maybe_unused dp83869_tbl[] = {
+ { DP83869_PHY_ID, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, dp83869_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83869 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx");
+MODULE_LICENSE("GPL v2");
diff --git a/include/dt-bindings/net/ti-dp83869.h b/include/dt-bindings/net/ti-dp83869.h
new file mode 100644
index 000000000000..863074be52c7
--- /dev/null
+++ b/include/dt-bindings/net/ti-dp83869.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Device Tree constants for the Texas Instruments DP83869 PHY
+ *
+ * Author: Dan Murphy <dmurphy@xxxxxx>
+ *
+ * Copyright: (C) 2019 Texas Instruments, Inc.
+ */
+
+#ifndef _DT_BINDINGS_TI_DP83869_H
+#define _DT_BINDINGS_TI_DP83869_H
+
+/* PHY CTRL bits */
+#define DP83869_PHYCR_FIFO_DEPTH_3_B_NIB 0x00
+#define DP83869_PHYCR_FIFO_DEPTH_4_B_NIB 0x01
+#define DP83869_PHYCR_FIFO_DEPTH_6_B_NIB 0x02
+#define DP83869_PHYCR_FIFO_DEPTH_8_B_NIB 0x03
+
+/* IO_MUX_CFG - Clock output selection */
+#define DP83869_CLK_O_SEL_CHN_A_RCLK 0x0
+#define DP83869_CLK_O_SEL_CHN_B_RCLK 0x1
+#define DP83869_CLK_O_SEL_CHN_C_RCLK 0x2
+#define DP83869_CLK_O_SEL_CHN_D_RCLK 0x3
+#define DP83869_CLK_O_SEL_CHN_A_RCLK_DIV5 0x4
+#define DP83869_CLK_O_SEL_CHN_B_RCLK_DIV5 0x5
+#define DP83869_CLK_O_SEL_CHN_C_RCLK_DIV5 0x6
+#define DP83869_CLK_O_SEL_CHN_D_RCLK_DIV5 0x7
+#define DP83869_CLK_O_SEL_CHN_A_TCLK 0x8
+#define DP83869_CLK_O_SEL_CHN_B_TCLK 0x9
+#define DP83869_CLK_O_SEL_CHN_C_TCLK 0xa
+#define DP83869_CLK_O_SEL_CHN_D_TCLK 0xb
+#define DP83869_CLK_O_SEL_REF_CLK 0xc
+
+#define DP83869_RGMII_COPPER_ETHERNET 0x00
+#define DP83869_RGMII_1000_BASE 0x01
+#define DP83869_RGMII_100_BASE 0x02
+#define DP83869_RGMII_SGMII_BRIDGE 0x03
+#define DP83869_1000M_MEDIA_CONVERT 0x04
+#define DP83869_100M_MEDIA_CONVERT 0x05
+#define DP83869_SGMII_COPPER_ETHERNET 0x06
+
+#endif
+
--
2.22.0.214.g8dca754b1e