Re: [PATCH v3 01/11] ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec

[Rob Herring]

On Tue, Oct 29, 2019 at 11:26:50AM +0000, Srinivas Kandagatla wrote:
> This patch adds bindings for wcd9340/wcd9341 audio codec which can
> support both SLIMbus and I2S/I2C interface.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
>  .../bindings/sound/qcom,wcd934x.yaml          | 162 ++++++++++++++++++
>  1 file changed, 162 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> new file mode 100644
> index 000000000000..d6cfde6597db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> @@ -0,0 +1,162 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> +
> +description: |
> +  Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
> +  It has in-built Soundwire controller, pin controller, interrupt mux and
> +  supports both I2S/I2C and SLIMbus audio interfaces.
> +
> +properties:
> +  compatible:
> +    const: slim217,250
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: GPIO spec for reset line to use
> +    maxItems: 1
> +
> +  slim-ifc-dev:
> +    description: SLIMBus Interface device phandle
> +    $ref: '/schemas/types.yaml#/definitions/phandle'
> +    maxItems: 1

Replied on previous version.

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: extclk
> +
> +  vdd-buck-supply:
> +    description: A reference to the 1.8V buck supply
> +
> +  vdd-buck-sido-supply:
> +    description: A reference to the 1.8V SIDO buck supply
> +
> +  vdd-rx-supply:
> +    description: A reference to the 1.8V rx supply
> +
> +  vdd-tx-supply:
> +    description: A reference to the 1.8V tx supply
> +
> +  vdd-vbat-supply:
> +    description: A reference to the vbat supply
> +
> +  vdd-io-supply:
> +    description: A reference to the 1.8V I/O supply
> +
> +  vdd-micbias-supply:
> +    description: A reference to the micbias supply
> +
> +  qcom,micbias1-microvolts:

The standard unit is 'microvolt', not 'microvolts'.

> +    description: micbias1 voltage between 1800000 - 2850000 microvolts
> +
> +  qcom,micbias2-microvolts:
> +    description: micbias2 voltage between 1800000 - 2850000 microvolts
> +
> +  qcom,micbias3-microvolts:
> +    description: micbias3 voltage between 1800000 - 2850000 microvolts
> +
> +  qcom,micbias4-microvolts:
> +    description: micbias4 voltage between 1800000 - 2850000 microvolts
> +
> +  clock-output-names:
> +    const: mclk
> +
> +  clock-frequency:
> +    description: Clock frequency of output clk in Hz
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +  '#clock-cells':
> +    const: 0
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +patternProperties:
> +  "^.*@[0-9a-f]+$":
> +    type: object
> +    description: |
> +      WCD934x subnode for each slave devices. Bindings of each subnodes
> +      depends on the specific driver providing the functionality and
> +      documented in their respective bindings.
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - slim-ifc-dev
> +  - interrupts
> +  - interrupt-controller
> +  - clock-frequency
> +  - clock-output-names
> +  - qcom,micbias1-microvolts
> +  - qcom,micbias2-microvolts
> +  - qcom,micbias3-microvolts
> +  - qcom,micbias4-microvolts
> +  - "#interrupt-cells"
> +  - "#clock-cells"
> +  - "#sound-dai-cells"
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +examples:
> +  - |
> +    codec@1,0{
> +        compatible = "slim217,250";
> +        reg  = <1 0>;
> +        reset-gpios = <&tlmm 64 0>;
> +        slim-ifc-dev  = <&wcd9340_ifd>;
> +        #sound-dai-cells = <1>;
> +        interrupt-parent = <&tlmm>;
> +        interrupts = <54 4>;
> +        interrupt-controller;
> +        #interrupt-cells = <1>;
> +        #clock-cells = <0>;
> +        clock-frequency = <9600000>;
> +        clock-output-names = "mclk";
> +        qcom,micbias1-microvolts = <1800000>;
> +        qcom,micbias2-microvolts = <1800000>;
> +        qcom,micbias3-microvolts = <1800000>;
> +        qcom,micbias4-microvolts = <1800000>;
> +        clock-names = "extclk";
> +        clocks = <&rpmhcc 2>;
> +
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        pinctrl@42 {
> +            reg = <0x42 0x2>;
> +        };
> +    };
> +
> +...
> -- 
> 2.21.0
>