Re: [PATCH 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs

From: Bjorn Andersson
Date: Wed Nov 06 2019 - 01:02:50 EST

Next message: Joel Stanley: "[PATCH 0/4] clocksource: Add ast2600 support to fttmr010"
Previous message: Shaokun Zhang: "Re: [PATCH] xfs: optimise xfs_mod_icount/ifree when delta < 0"
In reply to: Elliot Berman: "[PATCH 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs"
Next in thread: Vinod Koul: "Re: [PATCH 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon 04 Nov 17:27 PST 2019, Elliot Berman wrote:

> Create a consistent naming scheme for command IDs. The scheme is
> QCOM_SCM_##svc_##cmd. Remove unused macros QCOM_SCM_FLAG_HLOS,
> QCOM_SCM_FLAG_COLDBOOT_MC, QCOM_SCM_FLAG_WARMBOOT_MC,
> QCOM_SCM_CMD_CORE_HOTPLUGGED, and QCOM_SCM_BOOT_ADDR_MC.
>
> Signed-off-by: Elliot Berman <eberman@xxxxxxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> ---
> drivers/firmware/qcom_scm-32.c | 28 ++++++++++++++--------------
> drivers/firmware/qcom_scm-64.c | 38 +++++++++++++++++++-------------------
> drivers/firmware/qcom_scm.c | 8 ++++----
> drivers/firmware/qcom_scm.h | 41 ++++++++++++++++++-----------------------
> 4 files changed, 55 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
> index d416efc..87b520f 100644
> --- a/drivers/firmware/qcom_scm-32.c
> +++ b/drivers/firmware/qcom_scm-32.c
> @@ -356,7 +356,7 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
> set_cpu_present(cpu, false);
> }
>
> - return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
> + return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR,
> flags, virt_to_phys(entry));
> }
>
> @@ -395,7 +395,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
>
> cmd.addr = cpu_to_le32(virt_to_phys(entry));
> cmd.flags = cpu_to_le32(flags);
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_ADDR,
> &cmd, sizeof(cmd), NULL, 0);
> if (!ret) {
> for_each_cpu(cpu, cpus)
> @@ -415,7 +415,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
> */
> void __qcom_scm_cpu_power_down(u32 flags)
> {
> - qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
> + qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_TERMINATE_PC,
> flags & QCOM_SCM_FLUSH_FLAG_MASK);
> }
>
> @@ -425,7 +425,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
> __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id);
> __le32 ret_val = 0;
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL,
> &svc_cmd, sizeof(svc_cmd), &ret_val,
> sizeof(ret_val));
> if (ret)
> @@ -440,7 +440,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
> if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
> return -ERANGE;
>
> - return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
> + return qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE,
> req, req_cnt * sizeof(*req), resp, sizeof(*resp));
> }
>
> @@ -456,7 +456,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
>
> in = cpu_to_le32(peripheral);
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_IS_SUPPORTED_CMD,
> + QCOM_SCM_PIL_PAS_IS_SUPPORTED,
> &in, sizeof(in),
> &out, sizeof(out));
>
> @@ -477,7 +477,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
> request.image_addr = cpu_to_le32(metadata_phys);
>
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_INIT_IMAGE_CMD,
> + QCOM_SCM_PIL_PAS_INIT_IMAGE,
> &request, sizeof(request),
> &scm_ret, sizeof(scm_ret));
>
> @@ -500,7 +500,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
> request.len = cpu_to_le32(size);
>
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_MEM_SETUP_CMD,
> + QCOM_SCM_PIL_PAS_MEM_SETUP,
> &request, sizeof(request),
> &scm_ret, sizeof(scm_ret));
>
> @@ -515,7 +515,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
>
> in = cpu_to_le32(peripheral);
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
> + QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
> &in, sizeof(in),
> &out, sizeof(out));
>
> @@ -530,7 +530,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
>
> in = cpu_to_le32(peripheral);
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_SHUTDOWN_CMD,
> + QCOM_SCM_PIL_PAS_SHUTDOWN,
> &in, sizeof(in),
> &out, sizeof(out));
>
> @@ -543,7 +543,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
> __le32 in = cpu_to_le32(reset);
> int ret;
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET,
> &in, sizeof(in),
> &out, sizeof(out));
>
> @@ -552,8 +552,8 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
>
> int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
> {
> - return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
> - enable ? QCOM_SCM_SET_DLOAD_MODE : 0, 0);
> + return qcom_scm_call_atomic2(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE,
> + enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0, 0);
> }
>
> int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
> @@ -568,7 +568,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
> req.state = cpu_to_le32(state);
> req.id = cpu_to_le32(id);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE,
> &req, sizeof(req), &scm_ret, sizeof(scm_ret));
>
> return ret ? : le32_to_cpu(scm_ret);
> diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
> index e6721b5..f0b4853 100644
> --- a/drivers/firmware/qcom_scm-64.c
> +++ b/drivers/firmware/qcom_scm-64.c
> @@ -256,7 +256,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
> desc.args[0] = SMCCC_FUNCNUM(svc_id, cmd_id) |
> (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -284,7 +284,7 @@ int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
> desc.args[9] = req[4].val;
> desc.arginfo = QCOM_SCM_ARGS(10);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_HDCP_INVOKE, &desc,
> &res);
> *resp = res.a1;
>
> @@ -295,7 +295,7 @@ void __qcom_scm_init(void)
> {
> u64 cmd;
> struct arm_smccc_res res;
> - u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
> + u32 function = SMCCC_FUNCNUM(QCOM_SCM_SVC_INFO, QCOM_SCM_INFO_IS_CALL_AVAIL);
>
> /* First try a SMC64 call */
> cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
> @@ -320,7 +320,7 @@ bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
> desc.arginfo = QCOM_SCM_ARGS(1);
>
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_IS_SUPPORTED_CMD,
> + QCOM_SCM_PIL_PAS_IS_SUPPORTED,
> &desc, &res);
>
> return ret ? false : !!res.a1;
> @@ -337,7 +337,7 @@ int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
> desc.args[1] = metadata_phys;
> desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_INIT_IMAGE,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -355,7 +355,7 @@ int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
> desc.args[2] = size;
> desc.arginfo = QCOM_SCM_ARGS(3);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MEM_SETUP,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -371,7 +371,7 @@ int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
> desc.arginfo = QCOM_SCM_ARGS(1);
>
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
> + QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -386,7 +386,7 @@ int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
> desc.args[0] = peripheral;
> desc.arginfo = QCOM_SCM_ARGS(1);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_SHUTDOWN,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -402,7 +402,7 @@ int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
> desc.args[1] = 0;
> desc.arginfo = QCOM_SCM_ARGS(2);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PIL_PAS_MSS_RESET, &desc,
> &res);
>
> return ret ? : res.a1;
> @@ -418,7 +418,7 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
> desc.args[1] = id;
> desc.arginfo = QCOM_SCM_ARGS(2);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_REMOTE_STATE,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_REMOTE_STATE,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -445,7 +445,7 @@ int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
> QCOM_SCM_VAL, QCOM_SCM_VAL);
>
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
> - QCOM_MEM_PROT_ASSIGN_ID,
> + QCOM_SCM_MP_ASSIGN,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -461,7 +461,7 @@ int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
> desc.args[1] = spare;
> desc.arginfo = QCOM_SCM_ARGS(2);
>
> - ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_RESTORE_SEC_CFG,
> + ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP, QCOM_SCM_MP_RESTORE_SEC_CFG,
> &desc, &res);
>
> return ret ? : res.a1;
> @@ -478,7 +478,7 @@ int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
> desc.arginfo = QCOM_SCM_ARGS(1);
>
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
> - QCOM_SCM_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
> + QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE, &desc, &res);
>
> if (size)
> *size = res.a1;
> @@ -500,7 +500,7 @@ int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
> QCOM_SCM_VAL);
>
> ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
> - QCOM_SCM_IOMMU_SECURE_PTBL_INIT, &desc, &res);
> + QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT, &desc, &res);
>
> /* the pg table has been initialized already, ignore the error */
> if (ret == -EPERM)
> @@ -514,11 +514,11 @@ int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
> struct qcom_scm_desc desc = {0};
> struct arm_smccc_res res;
>
> - desc.args[0] = QCOM_SCM_SET_DLOAD_MODE;
> - desc.args[1] = enable ? QCOM_SCM_SET_DLOAD_MODE : 0;
> + desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
> + desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
> desc.arginfo = QCOM_SCM_ARGS(2);
>
> - return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_SET_DLOAD_MODE,
> + return qcom_scm_call(dev, QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_SET_DLOAD_MODE,
> &desc, &res);
> }
>
> @@ -558,10 +558,10 @@ int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
> struct qcom_scm_desc desc = {0};
> struct arm_smccc_res res;
>
> - desc.args[0] = QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL;
> + desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
> desc.args[1] = en;
> desc.arginfo = QCOM_SCM_ARGS(2);
>
> return qcom_scm_call_atomic(dev, QCOM_SCM_SVC_SMMU_PROGRAM,
> - QCOM_SCM_CONFIG_ERRATA1, &desc, &res);
> + QCOM_SCM_SMMU_CONFIG_ERRATA1, &desc, &res);
> }
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 40222b1..450d6d6 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -140,7 +140,7 @@ bool qcom_scm_hdcp_available(void)
> return ret;
>
> ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
> - QCOM_SCM_CMD_HDCP);
> + QCOM_SCM_HDCP_INVOKE);
>
> qcom_scm_clk_disable();
>
> @@ -181,7 +181,7 @@ bool qcom_scm_pas_supported(u32 peripheral)
> int ret;
>
> ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
> - QCOM_SCM_PAS_IS_SUPPORTED_CMD);
> + QCOM_SCM_PIL_PAS_IS_SUPPORTED);
> if (ret <= 0)
> return false;
>
> @@ -368,12 +368,12 @@ static void qcom_scm_set_download_mode(bool enable)
>
> avail = __qcom_scm_is_call_available(__scm->dev,
> QCOM_SCM_SVC_BOOT,
> - QCOM_SCM_SET_DLOAD_MODE);
> + QCOM_SCM_BOOT_SET_DLOAD_MODE);
> if (avail) {
> ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
> } else if (__scm->dload_mode_addr) {
> ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
> - enable ? QCOM_SCM_SET_DLOAD_MODE : 0);
> + enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
> } else {
> dev_err(__scm->dev,
> "No available mechanism for setting download mode\n");
> diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
> index baee744..99e91ba 100644
> --- a/drivers/firmware/qcom_scm.h
> +++ b/drivers/firmware/qcom_scm.h
> @@ -5,23 +5,18 @@
> #define __QCOM_SCM_INT_H
>
> #define QCOM_SCM_SVC_BOOT 0x1
> -#define QCOM_SCM_BOOT_ADDR 0x1
> -#define QCOM_SCM_SET_DLOAD_MODE 0x10
> -#define QCOM_SCM_BOOT_ADDR_MC 0x11
> -#define QCOM_SCM_SET_REMOTE_STATE 0xa
> +#define QCOM_SCM_BOOT_SET_ADDR 0x1
> +#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
> +#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0xa
> extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
> extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
>
> -#define QCOM_SCM_FLAG_HLOS 0x01
> -#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
> -#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
> extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
> const cpumask_t *cpus);
> extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
>
> -#define QCOM_SCM_CMD_TERMINATE_PC 0x2
> +#define QCOM_SCM_BOOT_TERMINATE_PC 0x2
> #define QCOM_SCM_FLUSH_FLAG_MASK 0x3
> -#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
> extern void __qcom_scm_cpu_power_down(u32 flags);
>
> #define QCOM_SCM_SVC_IO 0x5
> @@ -31,24 +26,24 @@ extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned in
> extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
>
> #define QCOM_SCM_SVC_INFO 0x6
> -#define QCOM_IS_CALL_AVAIL_CMD 0x1
> +#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x1
> extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
> u32 cmd_id);
>
> #define QCOM_SCM_SVC_HDCP 0x11
> -#define QCOM_SCM_CMD_HDCP 0x01
> +#define QCOM_SCM_HDCP_INVOKE 0x01
> extern int __qcom_scm_hdcp_req(struct device *dev,
> struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
>
> extern void __qcom_scm_init(void);
>
> #define QCOM_SCM_SVC_PIL 0x2
> -#define QCOM_SCM_PAS_INIT_IMAGE_CMD 0x1
> -#define QCOM_SCM_PAS_MEM_SETUP_CMD 0x2
> -#define QCOM_SCM_PAS_AUTH_AND_RESET_CMD 0x5
> -#define QCOM_SCM_PAS_SHUTDOWN_CMD 0x6
> -#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
> -#define QCOM_SCM_PAS_MSS_RESET 0xa
> +#define QCOM_SCM_PIL_PAS_INIT_IMAGE 0x1
> +#define QCOM_SCM_PIL_PAS_MEM_SETUP 0x2
> +#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET 0x5
> +#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x6
> +#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x7
> +#define QCOM_SCM_PIL_PAS_MSS_RESET 0xa
> extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
> extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
> dma_addr_t metadata_phys);
> @@ -86,21 +81,21 @@ static inline int qcom_scm_remap_error(int err)
> }
>
> #define QCOM_SCM_SVC_MP 0xc
> -#define QCOM_SCM_RESTORE_SEC_CFG 2
> +#define QCOM_SCM_MP_RESTORE_SEC_CFG 2
> extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
> u32 spare);
> -#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE 3
> -#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT 4
> +#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 3
> +#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 4
> #define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
> -#define QCOM_SCM_CONFIG_ERRATA1 0x3
> -#define QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL 0x2
> +#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x3
> +#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x2
> extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
> size_t *size);
> extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
> u32 size, u32 spare);
> extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
> bool enable);
> -#define QCOM_MEM_PROT_ASSIGN_ID 0x16
> +#define QCOM_SCM_MP_ASSIGN 0x16
> extern int __qcom_scm_assign_mem(struct device *dev,
> phys_addr_t mem_region, size_t mem_sz,
> phys_addr_t src, size_t src_sz,
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

Next message: Joel Stanley: "[PATCH 0/4] clocksource: Add ast2600 support to fttmr010"
Previous message: Shaokun Zhang: "Re: [PATCH] xfs: optimise xfs_mod_icount/ifree when delta < 0"
In reply to: Elliot Berman: "[PATCH 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs"
Next in thread: Vinod Koul: "Re: [PATCH 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]