Re: [PATCH v2 1/7] dt-bindings: pwm: allwinner: Add H6 PWM description

[ClÃment PÃron]

Hi,

On Tue, 5 Nov 2019 at 18:32, Maxime Ripard <mripard@xxxxxxxxxx> wrote:
>
> On Tue, Nov 05, 2019 at 01:34:37PM +0100, ClÃment PÃron wrote:
> > On Tue, 5 Nov 2019 at 12:11, Maxime Ripard <mripard@xxxxxxxxxx> wrote:
> > >
> > > Hi Clement, Uwe,
> > >
> > > On Mon, Nov 04, 2019 at 09:03:59AM +0100, Uwe Kleine-KÃnig wrote:
> > > > On Sun, Nov 03, 2019 at 09:33:28PM +0100, ClÃment PÃron wrote:
> > > > > From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > > > >
> > > > > H6 PWM block is basically the same as A20 PWM, except that it also has
> > > > > bus clock and reset line which needs to be handled accordingly.
> > > > >
> > > > > Expand Allwinner PWM binding with H6 PWM specifics.
> > > > >
> > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > > > > Signed-off-by: ClÃment PÃron <peron.clem@xxxxxxxxx>
> > > > > ---
> > > > >  .../bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 45 ++++++++++++++++++-
> > > > >  1 file changed, 44 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > > > > index 0ac52f83a58c..bf36ea509f31 100644
> > > > > --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > > > > +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
> > > > > @@ -30,13 +30,46 @@ properties:
> > > > >        - items:
> > > > >            - const: allwinner,sun50i-h5-pwm
> > > > >            - const: allwinner,sun5i-a13-pwm
> > > > > +      - const: allwinner,sun50i-h6-pwm
> > > > >
> > > > >    reg:
> > > > >      maxItems: 1
> > > > >
> > > > > -  clocks:
> > > > > +  # Even though it only applies to subschemas under the conditionals,
> > > > > +  # not listing them here will trigger a warning because of the
> > > > > +  # additionalsProperties set to false.
> > > > > +  clocks: true
> > > > > +  clock-names: true
> > > > > +  resets:
> > > > >      maxItems: 1
> > > > >
> > > > > +  if:
> > > > > +    properties:
> > > > > +      compatible:
> > > > > +        contains:
> > > > > +          const: allwinner,sun50i-h6-pwm
> > > > > +
> > > > > +  then:
> > > > > +    properties:
> > > > > +      clocks:
> > > > > +        items:
> > > > > +          - description: Module Clock
> > > > > +          - description: Bus Clock
> > > > > +
> > > > > +      clock-names:
> > > > > +        items:
> > > > > +          - const: mod
> > > > > +          - const: bus
> > > > > +
> > > > > +    required:
> > > > > +      - clock-names
> > > > > +      - resets
> > > > > +
> > > > > +  else:
> > > > > +    properties:
> > > > > +      clocks:
> > > > > +        maxItems: 1
> > > > > +
> > > >
> > > > I guess this hunk says "If this is a allwinner,sun50i-h6-pwm, a mod and
> > > > bus clock is required.", right?
> > > >
> > > > I wonder if it is sensible to require a clock-names property in the else
> > > > branch, too. This would make it obvious if the clock there corresponds
> > > > to the "mod" or the "bus" clock on H6. (I guess it's "mod".)
> > >
> > > This can be done a bit differently and could address your concerns
> > >
> > > Something like
> > >
> > > properties:
> > >   ...
> > >
> > >   clocks:
> > >     minItems: 1
> > >     maxItems: 2
> > >     items:
> > >       - description: Bus Clock
> > >       - description: Module Clock
> > >
> > > required:
> > >   - clocks
> > >
> > > if:
> > >   ...
> > >
> > > then:
> > >   properties:
> > >     clocks:
> > >       maxItems: 2
> >
> > Here we should set minItems to 2 right ?
> > so Max = Min = 2
>
> It's done automatically by the tooling when the other is missing.

Ok thanks,
I will update in v4.

Regards,
ClÃment

>
> Maxime