Re: [PATCH] PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM

[Stanimir Varbanov]

Hi,

On 11/7/19 11:32 AM, Stanimir Varbanov wrote:
> Hi Bjorn,
> 
> On 11/6/19 10:23 PM, Bjorn Andersson wrote:
>> On Mon 04 Nov 05:00 PST 2019, Stanimir Varbanov wrote:
>>
>>> Hi Bjorn,
>>>
>>> Thanks for the fix!
>>>
>>> On 11/2/19 2:24 AM, Bjorn Andersson wrote:
>>>> There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit
>>>> the fixup to only affect the PCIe 2.0 (0x106) and PCIe 3.0 (0x107)
>>>> bridges.
>>>
>>> Are you sure that this will not break ops_1_0_0 (Qcom IP rev.: 1.0.0
>>> Synopsys IP rev.: 4.11a) i.e. apq8084 ?
> 
> OK, I've checked DEVICE IDs for all supported SoCs in pcie-qcom driver:
> 
> apq8084 0x101
> ipq8064 0x101
> apq8064 0x101
> msm8996 0x104
> ipq8074 0x302
> ipq4019 0x1001
> qcs404  ??? (can you check for this SoC)
> 
> As you can see they are various, so I don't think we have to expose them
> in pci_ids.h. See my proposal below.
> 
> Of course the last word will be from PCI maintainers.
> 
>>>
>>
>> I am not, I've only tested this on db820c and db845c. Unfortunately I'm
>> unable to find a branch with the necessary dts snippets to test it. Do
>> you perhaps have a branch somewhere?
>>
>> Regards,
>> Bjorn
>>
>>>>
>>>> Cc: stable@xxxxxxxxxxxxxxx
>>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>>>> ---
>>>>  drivers/pci/controller/dwc/pcie-qcom.c | 3 ++-
>>>>  include/linux/pci_ids.h                | 2 ++
>>>>  2 files changed, 4 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
>>>> index 35f4980480bb..b91abf4d4905 100644
>>>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
>>>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
>>>> @@ -1441,7 +1441,8 @@ static void qcom_fixup_class(struct pci_dev *dev)
>>>>  {
>>>>  	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
>>>>  }
>>>> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class);
>>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCIE_DEVICE_ID_QCOM_PCIE20, qcom_fixup_class);
>>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCIE_DEVICE_ID_QCOM_PCIE30, qcom_fixup_class);
> 
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
> 
>>>>  
>>>>  static struct platform_driver qcom_pcie_driver = {
>>>>  	.probe = qcom_pcie_probe,
>>>> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
>>>> index 21a572469a4e..3d0724ee4d2f 100644
>>>> --- a/include/linux/pci_ids.h
>>>> +++ b/include/linux/pci_ids.h
>>>> @@ -2413,6 +2413,8 @@
>>>>  #define PCI_VENDOR_ID_LENOVO		0x17aa
>>>>  
>>>>  #define PCI_VENDOR_ID_QCOM		0x17cb
>>>> +#define PCIE_DEVICE_ID_QCOM_PCIE20	0x0106
>>>> +#define PCIE_DEVICE_ID_QCOM_PCIE30	0x0107

I looked in pci_ids.h, and it looks like this is the right place for
DEVICE_IDs so instead of pcie gen we could list the SoCs names?

#define PCIE_DEVICE_ID_QCOM_APQ8084	0x0101
#define PCIE_DEVICE_ID_QCOM_APQ8064	0x0101
....

-- 
regards,
Stan