[PATCH v4 1/7] dt-bindings: pwm: allwinner: Add H6 PWM description

[ClÃment PÃron]

From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>

H6 PWM block is basically the same as A20 PWM, except that it also has
bus clock and reset line which needs to be handled accordingly.

Expand Allwinner PWM binding with H6 PWM specifics.

Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Signed-off-by: ClÃment PÃron <peron.clem@xxxxxxxxx>
---
 .../bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 0ac52f83a58c..1bae446febbb 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -30,13 +30,51 @@ properties:
       - items:
           - const: allwinner,sun50i-h5-pwm
           - const: allwinner,sun5i-a13-pwm
+      - const: allwinner,sun50i-h6-pwm
 
   reg:
     maxItems: 1
 
   clocks:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Module Clock
+      - description: Bus Clock
+
+  # Even though it only applies to subschemas under the conditionals,
+  # not listing them here will trigger a warning because of the
+  # additionalsProperties set to false.
+  clock-names: true
+
+  resets:
     maxItems: 1
 
+  if:
+    properties:
+      compatible:
+        contains:
+          const: allwinner,sun50i-h6-pwm
+
+  then:
+    properties:
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        items:
+          - const: mod
+          - const: bus
+
+    required:
+      - clock-names
+      - resets
+
+  else:
+    properties:
+      clocks:
+        maxItems: 1
+
 required:
   - "#pwm-cells"
   - compatible
@@ -54,4 +92,14 @@ examples:
         #pwm-cells = <3>;
     };
 
+  - |
+    pwm@300a000 {
+      compatible = "allwinner,sun50i-h6-pwm";
+      reg = <0x0300a000 0x400>;
+      clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+      clock-names = "mod", "bus";
+      resets = <&ccu RST_BUS_PWM>;
+      #pwm-cells = <3>;
+    };
+
 ...
-- 
2.20.1