RE: [PATCH v2 1/1] remoteproc: add support for co-processor booted before kernel

[Loic PALLARDY]

Hi Bjorn,

Thanks for your review.

> -----Original Message-----
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Sent: samedi 9 novembre 2019 02:20
> To: Loic PALLARDY <loic.pallardy@xxxxxx>
> Cc: ohad@xxxxxxxxxx; linux-remoteproc@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; Arnaud POULIQUEN <arnaud.pouliquen@xxxxxx>;
> benjamin.gaignard@xxxxxxxxxx; Fabien DESSENNE
> <fabien.dessenne@xxxxxx>; s-anna@xxxxxx
> Subject: Re: [PATCH v2 1/1] remoteproc: add support for co-processor
> booted before kernel
> 
> On Mon 04 Nov 02:49 PST 2019, Loic Pallardy wrote:
> 
> > Remote processor could boot independently or be started before Linux
> > kernel by bootloader or any firmware.
> > This patch introduces a new property in rproc core, named preloaded,
> > to be able to allocate resources and sub-devices like vdev and to
> > synchronize with current state without loading firmware from file system.
> > It is platform driver responsibility to implement the right firmware
> > load ops according to HW specificities.
> >
> 
> Is it just preloaded or already started?
At the beginning, this properties was indeed to support an already started coprocessor, but discussing with Suman few months ago, we detected some cases for which firmware may be loaded before kernel start (firmware located in embedded flash or loaded by bootloaders) or may be loaded by a dedicated driver interface before rproc framework be called.
As rproc framework is mainly responsible for firmware loading and resource allocation, I named this property preloaded to cover as much as possible all cases.
> 
> > Signed-off-by: Loic Pallardy <loic.pallardy@xxxxxx>
> >
> > ---
> > Change from v1:
> > - Keep bool in struct rproc
> > ---
> >  drivers/remoteproc/remoteproc_core.c | 37
> +++++++++++++++++++++++++++---------
> >  include/linux/remoteproc.h           |  2 ++
> >  2 files changed, 30 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/remoteproc/remoteproc_core.c
> b/drivers/remoteproc/remoteproc_core.c
> > index 3c5fbbbfb0f1..7eaf0f949afa 100644
> > --- a/drivers/remoteproc/remoteproc_core.c
> > +++ b/drivers/remoteproc/remoteproc_core.c
> > @@ -1372,7 +1372,11 @@ static int rproc_fw_boot(struct rproc *rproc,
> const struct firmware *fw)
> >  	if (ret)
> >  		return ret;
> >
> > -	dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
> > +	if (fw)
> > +		dev_info(dev, "Booting fw image %s, size %zd\n", name,
> > +			 fw->size);
> > +	else
> > +		dev_info(dev, "Synchronizing with preloaded co-
> processor\n");
> >
> >  	/*
> >  	 * if enabling an IOMMU isn't relevant for this rproc, this is
> > @@ -1728,7 +1732,7 @@ static void rproc_crash_handler_work(struct
> work_struct *work)
> >   */
> >  int rproc_boot(struct rproc *rproc)
> >  {
> > -	const struct firmware *firmware_p;
> > +	const struct firmware *firmware_p = NULL;
> >  	struct device *dev;
> >  	int ret;
> >
> > @@ -1759,11 +1763,17 @@ int rproc_boot(struct rproc *rproc)
> >
> >  	dev_info(dev, "powering up %s\n", rproc->name);
> >
> > -	/* load firmware */
> > -	ret = request_firmware(&firmware_p, rproc->firmware, dev);
> > -	if (ret < 0) {
> > -		dev_err(dev, "request_firmware failed: %d\n", ret);
> > -		goto downref_rproc;
> > +	if (!rproc->preloaded) {
> > +		/* load firmware */
> > +		ret = request_firmware(&firmware_p, rproc->firmware,
> dev);
> > +		if (ret < 0) {
> > +			dev_err(dev, "request_firmware failed: %d\n", ret);
> > +			goto downref_rproc;
> > +		}
> > +	} else {
> > +		/* set firmware name to null as unknown */
> > +		kfree(rproc->firmware);
> > +		rproc->firmware = NULL;
> 
> What happens when the remoteproc crashes? What happens if I stop it and
> try to start it again?
Exactly, it should be stopped, then firmware should be provided and coprocessor restarted thanks to sysfs interface

> 
> >  	}
> >
> >  	ret = rproc_fw_boot(rproc, firmware_p);
> > @@ -1917,8 +1927,17 @@ int rproc_add(struct rproc *rproc)
> >  	/* create debugfs entries */
> >  	rproc_create_debug_dir(rproc);
> >
> > -	/* if rproc is marked always-on, request it to boot */
> > -	if (rproc->auto_boot) {
> > +	if (rproc->preloaded) {
> > +		/*
> > +		 * If rproc is marked already booted, no need to wait
> > +		 * for firmware.
> > +		 * Just handle associated resources and start sub devices
> > +		 */
> > +		ret = rproc_boot(rproc);
> 
> This will trickle down to your remoteproc driver's start() callback. If
> you really mean that "preloaded" means "already started", then I presume
> you're having some logic in your start() to turn it into a nop?
Yes it is the responsibility of the driver to know in which state coprocessor is.
Depending on the use case, driver could:
- do nothing if coprocessor already running
- boot coprocessor, if only firmware was preloaded
- reboot coprocessor to restart its execution on the preloaded firmware

> 
> > +		if (ret < 0)
> > +			return ret;
> > +	} else if (rproc->auto_boot) {
> > +		/* if rproc is marked always-on, request it to boot */
> >  		ret = rproc_trigger_auto_boot(rproc);
> >  		if (ret < 0)
> >  			return ret;
> > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> > index 16ad66683ad0..b68fbd576a77 100644
> > --- a/include/linux/remoteproc.h
> > +++ b/include/linux/remoteproc.h
> > @@ -479,6 +479,7 @@ struct rproc_dump_segment {
> >   * @table_sz: size of @cached_table
> >   * @has_iommu: flag to indicate if remote processor is behind an MMU
> >   * @auto_boot: flag to indicate if remote processor should be auto-started
> > + * @preloaded: remote processor has been preloaded before start
> sequence
> 
> I think this should be "skip_firmware_load", or if you really mean that
> the bootloader started the remote process perhaps this should be
> "@fw_booted: remote processor was booted by firmware" (or something
> similar).
I'm fine with "skip_firmware_load" or "skip_fw_load" to have a shorter name.
I'll also add "preload" in patch title.

Regards,
Loic

> 
> Regards,
> Bjorn
> 
> >   * @dump_segments: list of segments in the firmware
> >   * @nb_vdev: number of vdev currently handled by rproc
> >   */
> > @@ -512,6 +513,7 @@ struct rproc {
> >  	size_t table_sz;
> >  	bool has_iommu;
> >  	bool auto_boot;
> > +	bool preloaded;
> >  	struct list_head dump_segments;
> >  	int nb_vdev;
> >  };
> > --
> > 2.7.4
> >