Re: [PATCH] arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell

From: Marco Franchi
Date: Tue Nov 19 2019 - 07:03:09 EST

Hello Fabio,

Em seg., 18 de nov. de 2019 Ãs 17:29, Fabio Estevam
<festevam@xxxxxxxxx> escreveu:
> Hi Marco,
> On Mon, Nov 18, 2019 at 11:16 AM Marco Franchi <marcofrk@xxxxxxxxx> wrote:
> > > Also, is the schematics available?
> > Yes:
> Thanks. Would you also have the schematics for the SOM board?
I could not find the schematic, but at this page you will find a lot
of information regarding it:
> I tooked a quick look and I see a ALC5635 codec, but the dts shows
> WM8524 instead.
> Which one is correct?
Internally they are using WM8524, but I will confirm and test it again.
> > If I applied this change, I won't be able to boot the board, due to
> > the U-Boot dependence.
> > Should I try to apply the U-Boot mainline support first?
> You could build the mainline dtb and rename it with the fsl prefix
> locally so you could boot test it.
Cool! Thanks.
> Forgot to mention, but you also need to add a separate patch that adds
> this board entry into Documentation/devicetree/bindings/arm/fsl.yaml
> Regards,
> Fabio Estevam

Thanks Fabio, I will apply these points too.