Re: [PATCH 01/16] remoteproc: q6v5-mss: fixup MSM8998 MSS out of reset sequence

From: Jeffrey Hugo
Date: Tue Nov 19 2019 - 10:43:59 EST


On Tue, Nov 19, 2019 at 8:25 AM Sibi Sankar <sibis@xxxxxxxxxxxxxx> wrote:
>
> Hey Jeff,
>
> On 11/19/19 3:24 AM, Jeffrey Hugo wrote:
> > On Mon, Nov 18, 2019 at 2:43 PM Sibi Sankar <sibis@xxxxxxxxxxxxxx> wrote:
> >>
> >> Fixup the following in the MSS out of reset sequence on MSM8998:
> >> * skip ACC override on MSM8998.
> >> * wait for BHS_EN_REST_ACK to be set before setting the LDO to bypass.
> >> * remove "mem" clock from the active pool.
> >
> > Why any of this is necessary isn't explained.
>
> Honestly the above two fixes didn't seem to have any impact when I
> tested it on MSM8998 MTP just making sure that we allign with the
> out of reset sequence found on msm-4.4.

That should be mentioned in the commit text then.

>
> > Seems like it should be 3 separate patches.
> > Regarding the mem clock change, wouldn't it be an issue if we don't
> > vote for that?
>
> we already proxy vote for it though.

Ah, so we do. That should be mentioned in the commit text.

>
> >
> >>
> >> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> >> ---
> >> drivers/remoteproc/qcom_q6v5_mss.c | 23 ++++++++++++++++++++---
> >> 1 file changed, 20 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> >> index 471128a2e7239..2becf6dade936 100644
> >> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> >> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> >> @@ -100,6 +100,11 @@
> >> #define QDSP6SS_XO_CBCR 0x0038
> >> #define QDSP6SS_ACC_OVERRIDE_VAL 0x20
> >>
> >> +/* QDSP6v62 parameters */
> >> +#define QDSP6SS_BHS_EN_REST_ACK BIT(0)
> >> +#define BHS_CHECK_MAX_LOOPS 200
> >> +#define QDSP6SS_BHS_STATUS 0x0C4
> >> +
> >> /* QDSP6v65 parameters */
> >> #define QDSP6SS_SLEEP 0x3C
> >> #define QDSP6SS_BOOT_CORE_START 0x400
> >> @@ -505,8 +510,9 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >> int mem_pwr_ctl;
> >>
> >> /* Override the ACC value if required */
> >> - writel(QDSP6SS_ACC_OVERRIDE_VAL,
> >> - qproc->reg_base + QDSP6SS_STRAP_ACC);
> >> + if (qproc->version == MSS_MSM8996)
> >> + writel(QDSP6SS_ACC_OVERRIDE_VAL,
> >> + qproc->reg_base + QDSP6SS_STRAP_ACC);
> >>
> >> /* Assert resets, stop core */
> >> val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> >> @@ -534,6 +540,18 @@ static int q6v5proc_reset(struct q6v5 *qproc)
> >> val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> >> udelay(1);
> >>
> >> + /* wait for BHS_EN_REST_ACK to be set */
> >> + if (qproc->version == MSS_MSM8998) {
> >> + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_BHS_STATUS,
> >> + val, (val & QDSP6SS_BHS_EN_REST_ACK),
> >> + 1, BHS_CHECK_MAX_LOOPS);
> >> + if (ret) {
> >> + dev_err(qproc->dev,
> >> + "QDSP6SS_BHS_EN_REST_ACK timedout\n");
> >> + return -ETIMEDOUT;
> >> + }
> >> + }
> >> +
> >> /* Put LDO in bypass mode */
> >> val |= QDSP6v56_LDO_BYP;
> >> writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> >> @@ -1594,7 +1612,6 @@ static const struct rproc_hexagon_res msm8998_mss = {
> >> .active_clk_names = (char*[]){
> >> "iface",
> >> "bus",
> >> - "mem",
> >> "gpll0_mss",
> >> "mnoc_axi",
> >> "snoc_axi",
> >> --
> >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> >> a Linux Foundation Collaborative Project
> >>
> >
>
> --
> Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project