Re: [PATCH 1/2] dt-bindings: hwmon/pmbus: Add UCD90320 power sequencer

[Rob Herring]

On Fri, Nov 22, 2019 at 04:25:41PM -0600, Jim Wright wrote:
> From: Jim Wright <jlwright@xxxxxxxxxx>
> 
> Document the UCD90320 device tree binding.
> 
> Signed-off-by: Jim Wright <jlwright@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/hwmon/pmbus/ucd90320.txt    | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt

Can you make this a schema. See 
Documentation/devicetree/writing-schema.rst.

> 
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> new file mode 100644
> index 000000000000..e1c1057c6292
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> @@ -0,0 +1,13 @@
> +UCD90320 power sequencer
> +-------------------------
> +
> +Requires node properties:
> +- compatible : "ti,ucd90320"
> +- reg : the I2C address of the device. This is 0x11, 0x13, 0x17, 0x31, 0x33,
> +        0x37, 0x71, 0x73, or 0x77.
> +
> +Example:
> +	ucd90320@11 {
> +		compatible = "ti,ucd90320";
> +		reg = <0x11>;
> +	};
> -- 
> 2.17.1
>