[PATCH 1/2] power: supply: add CW2015 Fuel Gauge driver

From: Tobias Schramm
Date: Wed Dec 11 2019 - 08:40:33 EST


The CellWise CW2015 is a I2C interfaced shuntless Fuel Gauge for lithium-ion
batteries.
This patch adds support for the CellWise CW2015 Fuel Gauge.

Signed-off-by: Tobias Schramm <t.schramm@xxxxxxxxxxx>
---
drivers/power/supply/Kconfig | 7 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/cw2015_battery.c | 962 ++++++++++++++++++++++++++
include/linux/power/cw2015_battery.h | 122 ++++
4 files changed, 1092 insertions(+)
create mode 100644 drivers/power/supply/cw2015_battery.c
create mode 100644 include/linux/power/cw2015_battery.h

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 27164a1d3c7c..e3eb2dbaf44f 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -116,6 +116,13 @@ config BATTERY_CPCAP
Say Y here to enable support for battery on Motorola
phones and tablets such as droid 4.

+config BATTERY_CW2015
+ tristate "CW2015 battery driver"
+ depends on I2C
+ help
+ Say Y here to enable support for the cellwise cw2015
+ battery fuel gauge (used in the Pinebook Pro & others)
+
config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)"
depends on W1
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 6c7da920ea83..69727a10e835 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o
obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o
+obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c
new file mode 100644
index 000000000000..4f1e75c50374
--- /dev/null
+++ b/drivers/power/supply/cw2015_battery.c
@@ -0,0 +1,962 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fuel gauge driver for CellWise 2013 / 2015
+ *
+ * Copyright (C) 2012, RockChip
+ * Copyright (C) 2019, Tobias Schramm
+ *
+ * Authors: xuhuicong <xhc@xxxxxxxxxxxxxx>
+ * Authors: Tobias Schramm <tobias@xxxxxxxx>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/timekeeping.h>
+#include <linux/workqueue.h>
+
+#include <linux/power/cw2015_battery.h>
+
+static int dbg_enable;
+module_param_named(dbg_level, dbg_enable, int, 0644);
+
+#define cw_printk(args...) \
+ do { \
+ if (dbg_enable) { \
+ pr_info(args); \
+ } \
+ } while (0)
+
+
+#define PREFIX "cellwise,"
+
+static int cw_read(struct i2c_client *client, u8 reg, u8 buf[])
+{
+ return i2c_smbus_read_i2c_block_data(client, reg, 1, buf);
+}
+
+static int cw_write(struct i2c_client *client, u8 reg, u8 const buf[])
+{
+ return i2c_smbus_write_i2c_block_data(client, reg, 1, &buf[0]);
+}
+
+static int cw_read_word(struct i2c_client *client, u8 reg, u8 buf[])
+{
+ return i2c_smbus_read_i2c_block_data(client, reg, 2, buf);
+}
+
+int cw_update_config_info(struct cw_battery *cw_bat)
+{
+ int ret;
+ u8 reg_val;
+ u8 i;
+ u8 reset_val;
+
+ cw_printk("[FGADC] test config_info = 0x%x\n",
+ cw_bat->plat_data.cw_bat_config_info[0]);
+
+ /* make sure no in sleep mode */
+ ret = cw_read(cw_bat->client, CW2015_REG_MODE, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ reset_val = reg_val;
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ dev_err(&cw_bat->client->dev,
+ "device in sleep mode, cannot update battery info\n");
+ return -1;
+ }
+
+ /* update new battery info */
+ for (i = 0; i < CW2015_SIZE_BATINFO; i++) {
+ ret =
+ cw_write(cw_bat->client, CW2015_REG_BATINFO + i,
+ (u8 *)&cw_bat->plat_data.cw_bat_config_info[i]);
+
+ if (ret < 0)
+ return ret;
+ }
+
+ reg_val |= CW2015_CONFIG_UPDATE_FLG; /* set UPDATE_FLAG */
+ reg_val &= ~CW2015_MASK_ATHD; /* clear ATHD */
+ reg_val |= CW2015_ATHD(cw_bat->alert_level); /* set CW2015_ATHD */
+ ret = cw_write(cw_bat->client, CW2015_REG_CONFIG, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ /* check 2015/cw2013 for CW2015_ATHD & update_flag */
+ ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
+ dev_info(&cw_bat->client->dev,
+ "update flag for new battery info have not set..\n");
+ }
+
+ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level))
+ dev_info(&cw_bat->client->dev, "the new CW2015_ATHD have not set..\n");
+
+ /* reset */
+ reset_val &= ~(CW2015_MODE_RESTART);
+ reg_val = reset_val | CW2015_MODE_RESTART;
+ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ msleep(10);
+ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val);
+ if (ret < 0)
+ return ret;
+
+ cw_printk("cw2015 update config success!\n");
+
+ return 0;
+}
+
+static int cw_init(struct cw_battery *cw_bat)
+{
+ int ret;
+ int i;
+ u8 reg_val = CW2015_MODE_SLEEP;
+
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ reg_val = CW2015_MODE_NORMAL;
+ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reg_val);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
+ dev_info(&cw_bat->client->dev, "the new CW2015_ATHD have not set\n");
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
+ ret = cw_write(cw_bat->client, CW2015_REG_CONFIG, &reg_val);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = cw_read(cw_bat->client, CW2015_REG_CONFIG, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
+ cw_printk("update config flg is true, need update config\n");
+ ret = cw_update_config_info(cw_bat);
+ if (ret < 0) {
+ dev_info(&cw_bat->client->dev,
+ "update flag for new battery info have not set\n");
+ return ret;
+ }
+ } else {
+ for (i = 0; i < CW2015_SIZE_BATINFO; i++) {
+ ret = cw_read(cw_bat->client, (CW2015_REG_BATINFO + i),
+ &reg_val);
+ if (ret < 0)
+ return ret;
+
+ if (cw_bat->plat_data.cw_bat_config_info[i] != reg_val)
+ break;
+ }
+
+ if (i != CW2015_SIZE_BATINFO) {
+ dev_info(&cw_bat->client->dev,
+ "update flag for new battery info have not set\n");
+ ret = cw_update_config_info(cw_bat);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ for (i = 0; i < CW2015_READ_TRIES; i++) {
+ ret = cw_read(cw_bat->client, CW2015_REG_SOC, &reg_val);
+ if (ret < 0)
+ return ret;
+ else if (reg_val <= 100) // SOC can't be more than 100 %
+ break;
+ msleep(120);
+ }
+
+ if (i >= CW2015_READ_TRIES) {
+ reg_val = CW2015_MODE_SLEEP;
+ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reg_val);
+ dev_info(&cw_bat->client->dev, "report battery capacity error");
+ return -1;
+ }
+
+ cw_printk("cw2015 init success!\n");
+ return 0;
+}
+
+static int check_charger_online(struct device *dev, void *data)
+{
+ struct device *cw_dev = data;
+ struct power_supply *supply = dev_get_drvdata(dev);
+ union power_supply_propval val;
+
+ if (supply->desc->type == POWER_SUPPLY_TYPE_BATTERY) {
+ dev_dbg(cw_dev, "Skipping power supply %s since it is a battery\n",
+ dev_name(dev));
+ return 0; // Bail out, not a charger
+ }
+ if (!supply->desc->get_property(supply, POWER_SUPPLY_PROP_ONLINE,
+ &val)) {
+ return val.intval;
+ }
+ dev_dbg(cw_dev, "Skipping power supply %s since it does not "
+ "have an online property\n", dev_name(dev));
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static int device_parent_match_of_node(struct device *dev, const void *np)
+{
+ while (dev) {
+ if (dev->of_node == np) {
+ return 1;
+ }
+ dev = dev->parent;
+ }
+ return 0;
+}
+#endif
+
+static int get_charge_state(struct cw_battery *cw_bat)
+{
+ struct device *cw_dev = &cw_bat->client->dev;
+#ifdef CONFIG_OF
+ int i = 0, online = 0;
+ struct device_node *supply_of;
+
+ if (!cw_dev->of_node) {
+ dev_dbg(cw_dev, "Charger does not have an of node, scanning "
+ "all supplies\n");
+#endif
+ return !!class_for_each_device(power_supply_class, NULL,
+ cw_dev, check_charger_online);
+#ifdef CONFIG_OF
+ }
+ do {
+ struct device *supply_dev;
+
+ dev_dbg(cw_dev, "Scanning linked supplies of %s\n",
+ cw_dev->of_node->name);
+ supply_of = of_parse_phandle(cw_dev->of_node, "power-supplies",
+ i++);
+ if (!supply_of) {
+ dev_dbg(cw_dev, "Got empty of node, scan done\n");
+ break;
+ }
+ dev_dbg(cw_dev, "Got power supply %s\n", supply_of->name);
+ supply_dev = class_find_device(power_supply_class, NULL,
+ supply_of,
+ device_parent_match_of_node);
+ if (supply_dev) {
+ online = check_charger_online(supply_dev, NULL);
+ dev_dbg(supply_dev, "Charger online: %d\n", online);
+ put_device(supply_dev);
+ } else {
+ dev_warn(cw_dev, "Failed to get device for device "
+ "node %s\n", supply_of->name);
+ }
+ of_node_put(supply_of);
+ } while (!online);
+ return online;
+#endif
+}
+
+static int cw_por(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned char reset_val;
+
+ reset_val = CW2015_MODE_SLEEP;
+ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val);
+ if (ret < 0)
+ return ret;
+ reset_val = CW2015_MODE_NORMAL;
+ msleep(20);
+ ret = cw_write(cw_bat->client, CW2015_REG_MODE, &reset_val);
+ if (ret < 0)
+ return ret;
+ ret = cw_init(cw_bat);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+static int cw_get_capacity(struct cw_battery *cw_bat)
+{
+ int cw_capacity;
+ int ret;
+ unsigned char reg_val[2];
+
+ static int reset_loop;
+ static int charging_loop;
+ static int discharging_loop;
+ static int jump_flag;
+ static int charging_5_loop;
+ int sleep_cap;
+
+ ret = cw_read_word(cw_bat->client, CW2015_REG_SOC, reg_val);
+ if (ret < 0)
+ return ret;
+
+ cw_capacity = reg_val[0];
+
+ if ((cw_capacity < 0) || (cw_capacity > 100)) {
+ cw_printk("Error: cw_capacity = %d\n", cw_capacity);
+ reset_loop++;
+ if (reset_loop >
+ (CW2015_BATTERY_CAPACITY_ERROR / cw_bat->monitor_sec)) {
+ cw_por(cw_bat);
+ reset_loop = 0;
+ }
+ return cw_bat->capacity;
+ }
+ reset_loop = 0;
+
+ /* case 1 : aviod swing */
+ if (((cw_bat->charger_mode > 0) &&
+ (cw_capacity <= cw_bat->capacity - 1) &&
+ (cw_capacity > cw_bat->capacity - 9)) ||
+ ((cw_bat->charger_mode == 0) &&
+ (cw_capacity == (cw_bat->capacity + 1)))) {
+ if (!(cw_capacity == 0 && cw_bat->capacity <= 2))
+ cw_capacity = cw_bat->capacity;
+ }
+
+ /* case 2 : aviod no charge full */
+ if ((cw_bat->charger_mode > 0) &&
+ (cw_capacity >= 95) && (cw_capacity <= cw_bat->capacity)) {
+ cw_printk("Chaman join no charge full\n");
+ charging_loop++;
+ if (charging_loop >
+ (CW2015_BATTERY_UP_MAX_CHANGE / cw_bat->monitor_sec)) {
+ cw_capacity = (cw_bat->capacity + 1) <= 100 ?
+ (cw_bat->capacity + 1) : 100;
+ charging_loop = 0;
+ jump_flag = 1;
+ } else {
+ cw_capacity = cw_bat->capacity;
+ }
+ }
+
+ /* case 3 : avoid battery level jump to CW_BAT */
+ if ((cw_bat->charger_mode == 0) &&
+ (cw_capacity <= cw_bat->capacity) &&
+ (cw_capacity >= 90) && (jump_flag == 1)) {
+ cw_printk("Chaman join no charge full discharging\n");
+#ifdef CONFIG_PM
+ if (cw_bat->suspend_resume_mark == 1) {
+ cw_bat->suspend_resume_mark = 0;
+ sleep_cap = (cw_bat->after.tv_sec +
+ discharging_loop *
+ (cw_bat->monitor_sec / 1000)) /
+ (CW2015_BATTERY_DOWN_MAX_CHANGE / 1000);
+ cw_printk("sleep_cap = %d\n", sleep_cap);
+
+ if (cw_capacity >= cw_bat->capacity - sleep_cap) {
+ return cw_capacity;
+ }
+ if (!sleep_cap)
+ discharging_loop = discharging_loop +
+ 1 + cw_bat->after.tv_sec /
+ (cw_bat->monitor_sec / 1000);
+ else
+ discharging_loop = 0;
+ cw_printk("discharging_loop = %d\n",
+ discharging_loop);
+ return cw_bat->capacity - sleep_cap;
+ }
+#endif
+ discharging_loop++;
+ if (discharging_loop >
+ (CW2015_BATTERY_DOWN_MAX_CHANGE / cw_bat->monitor_sec)) {
+ if (cw_capacity >= cw_bat->capacity - 1)
+ jump_flag = 0;
+ else
+ cw_capacity = cw_bat->capacity - 1;
+
+ discharging_loop = 0;
+ } else {
+ cw_capacity = cw_bat->capacity;
+ }
+ }
+
+ /* case 4 : avoid battery level is 0% when long time charging */
+ if ((cw_bat->charger_mode > 0) && (cw_capacity == 0)) {
+ charging_5_loop++;
+ if (charging_5_loop >
+ CW2015_BATTERY_CHARGING_ZERO / cw_bat->monitor_sec) {
+ cw_por(cw_bat);
+ charging_5_loop = 0;
+ }
+ } else if (charging_5_loop != 0) {
+ charging_5_loop = 0;
+ }
+#ifdef CONFIG_PM
+ if (cw_bat->suspend_resume_mark == 1)
+ cw_bat->suspend_resume_mark = 0;
+#endif
+ return cw_capacity;
+}
+
+static int cw_get_voltage(struct cw_battery *cw_bat)
+{
+ int ret;
+ u8 reg_val[2];
+ u16 value16, value16_1, value16_2, value16_3;
+ int voltage;
+ int res1, res2;
+
+ ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val);
+ if (ret < 0)
+ return ret;
+ value16 = (reg_val[0] << 8) + reg_val[1];
+
+ ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val);
+ if (ret < 0)
+ return ret;
+ value16_1 = (reg_val[0] << 8) + reg_val[1];
+
+ ret = cw_read_word(cw_bat->client, CW2015_REG_VCELL, reg_val);
+ if (ret < 0)
+ return ret;
+ value16_2 = (reg_val[0] << 8) + reg_val[1];
+
+ if (value16 > value16_1) {
+ value16_3 = value16;
+ value16 = value16_1;
+ value16_1 = value16_3;
+ }
+
+ if (value16_1 > value16_2) {
+ value16_3 = value16_1;
+ value16_1 = value16_2;
+ value16_2 = value16_3;
+ }
+
+ if (value16 > value16_1) {
+ value16_3 = value16;
+ value16 = value16_1;
+ value16_1 = value16_3;
+ }
+
+ voltage = value16_1 * 312 / 1024;
+
+ if (cw_bat->plat_data.divider_high &&
+ cw_bat->plat_data.divider_low) {
+ res1 = cw_bat->plat_data.divider_high;
+ res2 = cw_bat->plat_data.divider_low;
+ voltage = voltage * (res1 + res2) / res2;
+ }
+
+ dev_dbg(&cw_bat->client->dev, "the cw201x voltage=%d,reg_val=%x %x\n",
+ voltage, reg_val[0], reg_val[1]);
+ return voltage;
+}
+
+/*This function called when get RRT from cw2015*/
+static int cw_get_time_to_empty(struct cw_battery *cw_bat)
+{
+ int ret;
+ u8 reg_val;
+ u16 value16;
+
+ ret = cw_read(cw_bat->client, CW2015_REG_RRT_ALERT, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ value16 = reg_val;
+
+ ret = cw_read(cw_bat->client, CW2015_REG_RRT_ALERT + 1, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ value16 = ((value16 << 8) + reg_val) & CW2015_MASK_SOC;
+ return value16;
+}
+
+static void cw_update_charge_status(struct cw_battery *cw_bat)
+{
+ int cw_charger_mode;
+
+ cw_charger_mode = get_charge_state(cw_bat);
+ if (cw_bat->charger_mode != cw_charger_mode) {
+ cw_bat->charger_mode = cw_charger_mode;
+ cw_bat->bat_change = 1;
+ if (cw_charger_mode)
+ cw_bat->charge_count++;
+ }
+}
+
+static void cw_update_capacity(struct cw_battery *cw_bat)
+{
+ int cw_capacity;
+
+ cw_capacity = cw_get_capacity(cw_bat);
+ if ((cw_capacity >= 0) && (cw_capacity <= 100) &&
+ (cw_bat->capacity != cw_capacity)) {
+ cw_bat->capacity = cw_capacity;
+ cw_bat->bat_change = 1;
+ }
+}
+
+static void cw_update_vol(struct cw_battery *cw_bat)
+{
+ int ret;
+
+ ret = cw_get_voltage(cw_bat);
+ if ((ret >= 0) && (cw_bat->voltage != ret))
+ cw_bat->voltage = ret;
+}
+
+static void cw_update_status(struct cw_battery *cw_bat)
+{
+ int status;
+
+ if (cw_bat->charger_mode > 0) {
+ if (cw_bat->capacity >= 100)
+ status = POWER_SUPPLY_STATUS_FULL;
+ else
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ } else {
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (cw_bat->status != status) {
+ cw_bat->status = status;
+ cw_bat->bat_change = 1;
+ }
+}
+
+static void cw_update_time_to_empty(struct cw_battery *cw_bat)
+{
+ int ret;
+
+ ret = cw_get_time_to_empty(cw_bat);
+ if ((ret >= 0) && (cw_bat->time_to_empty != ret)) {
+ cw_bat->time_to_empty = ret;
+ cw_bat->bat_change = 1;
+ }
+}
+
+static void cw_bat_work(struct work_struct *work)
+{
+ struct delayed_work *delay_work;
+ struct cw_battery *cw_bat;
+ int ret;
+ u8 reg_val;
+ int i = 0;
+
+ delay_work = container_of(work, struct delayed_work, work);
+ cw_bat =
+ container_of(delay_work, struct cw_battery, battery_delay_work);
+
+ /* Add for battery swap start */
+ ret = cw_read(cw_bat->client, CW2015_REG_MODE, &reg_val);
+ if (ret < 0) {
+ cw_bat->bat_mode = MODE_VIRTUAL;
+ cw_bat->bat_change = 1;
+ } else {
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ for (i = 0; i < 5; i++) {
+ if (cw_por(cw_bat) == 0)
+ break;
+ }
+ }
+ cw_update_capacity(cw_bat);
+ cw_update_vol(cw_bat);
+ cw_update_charge_status(cw_bat);
+ cw_update_status(cw_bat);
+ cw_update_time_to_empty(cw_bat);
+ }
+ /* Add for battery swap end */
+ cw_printk("charger_mod = %d\n", cw_bat->charger_mode);
+ cw_printk("status = %d\n", cw_bat->status);
+ cw_printk("capacity = %d\n", cw_bat->capacity);
+ cw_printk("voltage = %d\n", cw_bat->voltage);
+
+#ifdef CONFIG_PM
+ if (cw_bat->suspend_resume_mark == 1)
+ cw_bat->suspend_resume_mark = 0;
+#endif
+
+ if (cw_bat->bat_change == 1) {
+ power_supply_changed(cw_bat->rk_bat);
+ cw_bat->bat_change = 0;
+ }
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work,
+ msecs_to_jiffies(cw_bat->monitor_sec));
+}
+
+static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
+{
+ return cw_bat->time_to_empty > 0 &&
+ cw_bat->time_to_empty < CW2015_MASK_SOC &&
+ cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int cw_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct cw_battery *cw_bat;
+
+ cw_bat = power_supply_get_drvdata(psy);
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = cw_bat->capacity;
+ if (cw_bat->bat_mode == MODE_VIRTUAL)
+ val->intval = CW2015_VIRTUAL_SOC;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = cw_bat->status;
+ if (cw_bat->bat_mode == MODE_VIRTUAL)
+ val->intval = CW2015_VIRTUAL_STATUS;
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = cw_bat->voltage <= 0 ? 0 : 1;
+ if (cw_bat->bat_mode == MODE_VIRTUAL)
+ val->intval = CW2015_VIRTUAL_PRESET;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = cw_bat->voltage * 1000;
+ if (cw_bat->bat_mode == MODE_VIRTUAL)
+ val->intval = CW2015_VIRTUAL_VOLTAGE * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat)) {
+ val->intval = cw_bat->time_to_empty;
+ } else {
+ val->intval = 0;
+ }
+ if (cw_bat->bat_mode == MODE_VIRTUAL)
+ val->intval = CW2015_VIRTUAL_TIME2EMPTY;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = cw_bat->charge_count;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = cw_bat->plat_data.design_capacity * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = CW2015_VIRTUAL_TEMPERATURE;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat)) {
+ // calculate remaining capacity
+ val->intval = cw_bat->plat_data.design_capacity * 1000;
+ val->intval = val->intval * cw_bat->capacity / 100;
+
+ // estimate current based on time to empty (in minutes)
+ val->intval = 60 * val->intval / cw_bat->time_to_empty;
+ } else {
+ val->intval = 0;
+ }
+
+ if (cw_bat->bat_mode == MODE_VIRTUAL)
+ val->intval = CW2015_VIRTUAL_CURRENT;
+ break;
+
+ default:
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property cw_battery_properties[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static const struct power_supply_desc cw2015_bat_desc = {
+ .name = "cw2015-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = cw_battery_properties,
+ .num_properties = ARRAY_SIZE(cw_battery_properties),
+ .get_property = cw_battery_get_property,
+};
+
+#ifdef CONFIG_OF
+static int cw2015_parse_dt(struct cw_battery *cw_bat)
+{
+ struct device *dev = &cw_bat->client->dev;
+ struct device_node *node = dev->of_node;
+ struct property *prop;
+ int length;
+ u32 value;
+ int ret;
+ struct cw_bat_platform_data *data = &cw_bat->plat_data;
+
+ if (!node)
+ return -ENODEV;
+
+ memset(data, 0, sizeof(*data));
+
+ /* determine the number of config info */
+ prop = of_find_property(node, PREFIX"bat-config-info", &length);
+ if (!prop)
+ return -EINVAL;
+
+ length /= sizeof(u32);
+
+ if (length > 0) {
+ size_t size = sizeof(*data->cw_bat_config_info) * length;
+
+ data->cw_bat_config_info = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!data->cw_bat_config_info)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(node, PREFIX"bat-config-info",
+ data->cw_bat_config_info,
+ length);
+ if (ret < 0)
+ return ret;
+ }
+
+ cw_bat->bat_mode = MODE_BATTERY;
+ cw_bat->monitor_sec = CW2015_DEFAULT_MONITOR_SEC *
+ CW2015_TIMER_MS_COUNTS;
+
+ prop = of_find_property(node, PREFIX"voltage-divider", &length);
+ if (prop) {
+ length /= sizeof(u32);
+ if (length != 2) {
+ dev_err(dev, "Length of voltage divider array must be "
+ "2, not %u\n", length);
+ return -EINVAL;
+ }
+ ret = of_property_read_u32_index(node, PREFIX"voltage-divider",
+ 0, &data->divider_high);
+ if (ret) {
+ dev_err(dev, "Failed to read value of high side "
+ "voltage divider resistor: %d\n", ret);
+ return ret;
+ }
+ ret = of_property_read_u32_index(node, PREFIX"voltage-divider",
+ 1, &data->divider_low);
+ if (ret) {
+ dev_err(dev, "Failed to read value of low side "
+ "voltage divider resistor: %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = of_property_read_u32(node, PREFIX"divider-res2", &value);
+ if (ret < 0)
+ value = 0;
+ data->divider_low = value;
+
+ ret = of_property_read_u32(node, PREFIX"virtual-power", &value);
+ if (ret < 0)
+ value = 0;
+ cw_bat->bat_mode = value;
+
+ ret = of_property_read_u32(node, PREFIX"monitor-interval", &value);
+ if (ret < 0)
+ dev_err(dev, "monitor-interval missing!\n");
+ else
+ cw_bat->monitor_sec = value * CW2015_TIMER_MS_COUNTS;
+
+ ret = of_property_read_u32(node, PREFIX"design-capacity", &value);
+ if (ret < 0) {
+ dev_err(dev, "design-capacity missing!\n");
+ data->design_capacity = 2000;
+ } else {
+ data->design_capacity = value;
+ }
+
+ of_property_read_u8(node, PREFIX"alert-level", &cw_bat->alert_level);
+ if (cw_bat->alert_level > 100) {
+ dev_err(dev, "invalid alert_level, clamping to 100 %%\n");
+ cw_bat->alert_level = 100;
+ }
+
+ return 0;
+}
+#else
+static int cw2015_parse_dt(struct cw_battery *cw_bat)
+{
+ return -ENODEV;
+}
+#endif
+
+static int cw_bat_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct cw_battery *cw_bat;
+ struct power_supply_config psy_cfg = {0};
+
+ cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
+ if (!cw_bat) {
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(client, cw_bat);
+ cw_bat->client = client;
+
+ ret = cw2015_parse_dt(cw_bat);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "failed to find cw2015 platform data\n");
+ return ret;
+ }
+
+ cw_bat->capacity = 1;
+ cw_bat->voltage = 0;
+ cw_bat->status = 0;
+ cw_bat->suspend_resume_mark = 0;
+ cw_bat->charger_mode = CW2015_NO_CHARGING;
+ cw_bat->bat_change = 0;
+
+ ret = cw_init(cw_bat);
+ if (ret) {
+ pr_err("%s cw_init error\n", __func__);
+ return ret;
+ }
+
+ psy_cfg.drv_data = cw_bat;
+
+ cw_bat->rk_bat = devm_power_supply_register(&client->dev,
+ &cw2015_bat_desc, &psy_cfg);
+ if (IS_ERR(cw_bat->rk_bat)) {
+ dev_err(&cw_bat->client->dev,
+ "power supply register rk_bat error\n");
+ return -1;
+ }
+
+ cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
+ INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work);
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, msecs_to_jiffies(10));
+
+ dev_info(&cw_bat->client->dev,
+ "cw2015/cw2013 driver probe success\n");
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int cw_bat_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ ktime_get_boottime_ts64(&cw_bat->suspend_time_before);
+ cancel_delayed_work(&cw_bat->battery_delay_work);
+ return 0;
+}
+
+static int cw_bat_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cw_bat->suspend_resume_mark = 1;
+ ktime_get_boottime_ts64(&cw_bat->after);
+ cw_bat->after = timespec64_sub(cw_bat->after,
+ cw_bat->suspend_time_before);
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, msecs_to_jiffies(2));
+ return 0;
+}
+
+static const struct dev_pm_ops cw_bat_pm_ops = {
+ .suspend = cw_bat_suspend,
+ .resume = cw_bat_resume,
+};
+#endif
+
+static int cw_bat_remove(struct i2c_client *client)
+{
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ dev_dbg(&cw_bat->client->dev, "%s\n", __func__);
+ cancel_delayed_work(&cw_bat->battery_delay_work);
+ return 0;
+}
+
+static const struct i2c_device_id cw_bat_id_table[] = {
+ { "cw201x", 0 },
+ { "cw2013", 0 },
+ { "cw2015", 0 },
+ {}
+};
+
+static const struct of_device_id cw2015_of_match[] = {
+ { .compatible = PREFIX"cw201x" },
+ { .compatible = PREFIX"cw2013" },
+ { .compatible = PREFIX"cw2015" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, cw2015_of_match);
+
+static struct i2c_driver cw_bat_driver = {
+ .driver = {
+ .name = PREFIX"cw201x",
+#ifdef CONFIG_PM
+ .pm = &cw_bat_pm_ops,
+#endif
+ },
+ .probe = cw_bat_probe,
+ .remove = cw_bat_remove,
+ .id_table = cw_bat_id_table,
+};
+
+static int __init cw_bat_init(void)
+{
+ return i2c_add_driver(&cw_bat_driver);
+}
+
+static void __exit cw_bat_exit(void)
+{
+ i2c_del_driver(&cw_bat_driver);
+}
+
+module_init(cw_bat_init);
+module_exit(cw_bat_exit);
+
+MODULE_AUTHOR("xhc <xhc@xxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Tobias Schramm <t.schramm@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/power/cw2015_battery.h b/include/linux/power/cw2015_battery.h
new file mode 100644
index 000000000000..77c8ce17799f
--- /dev/null
+++ b/include/linux/power/cw2015_battery.h
@@ -0,0 +1,122 @@
+/*
+ * Fuel gauge driver for CellWise 2013 / 2015
+ *
+ * Copyright (C) 2012, RockChip
+ * Copyright (C) 2019, Tobias Schramm
+ *
+ * Authors: xuhuicong <xhc@xxxxxxxxxxxxxx>
+ * Authors: Tobias Schramm <tobias@xxxxxxxx>
+ *
+ * Based on rk30_adc_battery.c
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef CW2015_BATTERY_H
+#define CW2015_BATTERY_H
+
+#define CW2015_SIZE_BATINFO 64
+
+#define CW2015_GPIO_HIGH 1
+#define CW2015_GPIO_LOW 0
+
+#define CW2015_READ_TRIES 30
+
+#define CW2015_REG_VERSION 0x0
+#define CW2015_REG_VCELL 0x2
+#define CW2015_REG_SOC 0x4
+#define CW2015_REG_RRT_ALERT 0x6
+#define CW2015_REG_CONFIG 0x8
+#define CW2015_REG_MODE 0xA
+#define CW2015_REG_BATINFO 0x10
+
+#define CW2015_MODE_SLEEP_MASK (0x3<<6)
+#define CW2015_MODE_SLEEP (0x3<<6)
+#define CW2015_MODE_NORMAL (0x0<<6)
+#define CW2015_MODE_QUICK_START (0x3<<4)
+#define CW2015_MODE_RESTART (0xf<<0)
+
+#define CW2015_CONFIG_UPDATE_FLG (0x01<<1)
+#define CW2015_ATHD(x) ((x)<<3)
+#define CW2015_MASK_ATHD (0x1f<<3)
+#define CW2015_MASK_SOC (0x1fff)
+
+#define CW2015_I2C_SPEED 100000
+#define CW2015_BATTERY_UP_MAX_CHANGE (420 * 1000)
+#define CW2015_BATTERY_DOWN_MAX_CHANGE (120 * 1000)
+#define CW2015_BATTERY_DOWN_CHANGE 60
+#define CW2015_BATTERY_DOWN_MIN_CHANGE_RUN 30
+#define CW2015_BATTERY_DOWN_MIN_CHANGE_SLEEP 1800
+#define CW2015_BATTERY_JUMP_TO_ZERO (30 * 1000)
+#define CW2015_BATTERY_CAPACITY_ERROR (40 * 1000)
+#define CW2015_BATTERY_CHARGING_ZERO (1800 * 1000)
+
+#define CW2015_DOUBLE_SERIES_BATTERY 0
+
+#define CW2015_CHARGING_ON 1
+#define CW2015_NO_CHARGING 0
+
+#define CW2015_BATTERY_DOWN_MAX_CHANGE_RUN_AC_ONLINE 3600
+
+#define CW2015_NO_STANDARD_AC_BIG_CHARGE_MODE 1
+/* #define CW2015_SYSTEM_SHUTDOWN_VOLTAGE 3400000 */
+#define CW2015_BAT_LOW_INTERRUPT 1
+
+#define CW2015_USB_CHARGER_MODE 1
+#define CW2015_AC_CHARGER_MODE 2
+#define CW2015_QUICKSTART 0
+
+#define CW2015_TIMER_MS_COUNTS 1000
+#define CW2015_DEFAULT_MONITOR_SEC 8
+
+/* virtual params */
+#define CW2015_VIRTUAL_CURRENT 1000
+#define CW2015_VIRTUAL_VOLTAGE 3888
+#define CW2015_VIRTUAL_SOC 66
+#define CW2015_VIRTUAL_PRESET 1
+#define CW2015_VIRTUAL_TEMPERATURE 188
+#define CW2015_VIRTUAL_TIME2EMPTY 60
+#define CW2015_VIRTUAL_STATUS POWER_SUPPLY_STATUS_CHARGING
+
+enum bat_mode {
+ MODE_BATTERY = 0,
+ MODE_VIRTUAL,
+};
+
+struct cw_bat_platform_data {
+ u32 divider_high;
+ u32 divider_low;
+ u32 *cw_bat_config_info;
+ int design_capacity;
+};
+
+struct cw_battery {
+ struct i2c_client *client;
+ struct workqueue_struct *battery_workqueue;
+ struct delayed_work battery_delay_work;
+ struct cw_bat_platform_data plat_data;
+
+ struct power_supply *rk_bat;
+
+#ifdef CONFIG_PM
+ struct timespec64 suspend_time_before;
+ struct timespec64 after;
+ int suspend_resume_mark;
+#endif
+ int charger_mode;
+ int capacity;
+ int voltage;
+ int status;
+ int time_to_empty;
+ int alt;
+ u32 monitor_sec;
+ u32 bat_mode;
+ int bat_change;
+ int charge_count;
+ u8 alert_level;
+};
+
+#endif
--
2.24.0