Re: [PATCH v2 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180

[rkambl]

On 2019-12-12 00:31, Doug Anderson wrote:
> Hi,
>
> On Thu, Nov 28, 2019 at 1:55 AM Rajeshwari <rkambl@xxxxxxxxxxxxxx> 
> wrote:
> > Add TSENS node and user thermal zone for TSENS sensors in SC7180.
> >
> > Signed-off-by: Rajeshwari <rkambl@xxxxxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/sc7180.dtsi | 527 
> > +++++++++++++++++++++++++++++++++++
> >  1 file changed, 527 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
> > b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 666e9b9..6656ffc 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -911,6 +911,26 @@
> >                         status = "disabled";
> >                 };
> >
> > +               tsens0: thermal-sensor@c263000 {
> > +                       compatible = 
> > "qcom,sc7180-tsens","qcom,tsens-v2";
>
> Can you please send a patch listing this configuration in
> "Documentation/devicetree/bindings/thermal/qcom-tsens.yaml"?  You
> shouldn't need to re-send the dts since it looks like it's already
> landed, but it's good to get the bindings happy.

Sure, i will send the patch, adding this configuration in 
qcom-tsens.yaml.
> Thanks!
>
> -Rajeshwari